East Coast Gear Supply » ECGS
ECGS Categories
East Coast Gear Supply offers wholesale discount prices on Dana gears, off-road ring and pinions, ring and pinion gear sets, master install kits, pinion kits, mini install kits, axles, ujoints,...More Details »
Here are some great Differential tools that make the job go much easier. Rear end work can be difficult with out the right tools.
East Coast Gear Supply’s “ECGS Rewards” Gift Cards and Bonus Dollars
Available in $100, $50, and $25 amounts, your ECGS Rewards Cards are redeemable towards ECGS Parts and Merchandise at...More Details »
In an effort to support our customers needs. We attempt to stock nearly every part that goes in and around an axle. In this category you will find Trusses, Tube Sleeves, Limit Straps and more. All...More Details »
East Coast Gear Supply offers wholesale discount prices on Ford 10.5" gears, off-road ring and pinions, ring and pinion gear sets, master install kits, pinion kits, mini install kits, axles,...More Details »
East Coast Gear Supply offers wholesale discount prices on Ford 7.5" gears, off-road ring and pinions, ring and pinion gear sets, master install kits, pinion kits, mini install kits, axles,...More Details »
East Coast Gear Supply offers wholesale discount prices on Ford 8" gears, off-road ring and pinions, ring and pinion gear sets, master install kits, pinion kits, mini install kits, axles, ujoints,...More Details »
East Coast Gear Supply offers wholesale discount prices on Ford 8.8" gears, off-road ring and pinions, ring and pinion gear sets, master install kits, pinion kits, mini install kits, axles,...More Details »
East Coast Gear Supply offers wholesale discount prices on Ford 8.8" Reverse gears, off-road ring and pinions, ring and pinion gear sets, master install kits, pinion kits, mini install kits,...More Details »
Ford 8.8" Axle
Please read our Jeep FAQ Page for all questions related to Jeep complete assemblies.
More Details »
Every part you will need for an 8.8 swap into your TJ,YJ, or XJ from one place. All parts listed in this section are kept in stock in large qty. We believe these parts to be not only the best quality but also the most cost effective.
East Coast Gear Supply offers wholesale discount prices on Ford 9" gears, off-road ring and pinions, ring and pinion gear sets, master install kits, pinion kits, mini install kits, axles, ujoints,...More Details »
High tensile strength 4340 Chromoly is heat-treated twice to produce these heavy-duty axles that are up to 30% stronger. Exclusive 10-Year warranty. Shafts come completely assembled with inner and...More Details »
East Coast Gear Supply offers wholesale discount prices on GM 10 Bolt 8.5" gears, ring and pinions, ring and pinion gear sets, master install kits, pinion kits, mini install kits, axles, ujoints,...More Details »
East Coast Gear Supply offers wholesale discount prices on GM 10 Bolt 8.6" gears, ring and pinions, ring and pinion gear sets, master install kits, pinion kits, mini install kits, axles, ujoints,...More Details »
East Coast Gear Supply offers wholesale discount prices on GM 11.5 inch gears, ring and pinions, ring and pinion gear sets, master install kits, pinion kits, mini install kits, axles, ujoints,...More Details »
FITS:
Chevelle (64-72)
Camaro (67-72)
Chevy II, Nova (65-72)
El Camino (65-72)
F85 (68-70)
Firebird (67-72)
Grand Prix (70-72)
GTO (65-72)
Impala (65-72)
Le Mans (65-72)...More Details »
GM 7.2/7.25" IFS Diff Applications Include:
.newspaper {
-webkit-columns: 100px 2; /* Chrome, Safari, Opera */
-moz-columns: 100px 2; /* Firefox */
columns: 100px 2;...More Details »
FITS:
S10, S15 (82-present)
Astro/Safari (85-Present)
Bravada (91-Present)
Buick Full Size (77-85)
Camaro (82-02)
Century (78-81)
Chevy Full Size Car (77-96)
Cutlass (78-87)...More Details »
9-7x: 2005 - 2008 (Rear)
Ascender: 2003 - 2008 (Rear)
Bravada: 2000 - 2004 (Rear)
Canyon: 2004 - 2012 (Rear)
Colorado: 2004 - 2013 (Rear)
Envoy: 2002 - 2009 (Rear)
H3: 2005 -...More Details »
FITS:
Camaro (67-71)
Caprice (65-71)
El Camino (64-71)
Impala (65-72)
Monte Carlo (70-72)
Nova, Chevy II, Chevelle (64-72)
Sprint (71-72)
FITS:
GM1500/2500 (88-06)
Tahoe/Yukon (92-06)
Blazer (92-94)
Suburban (92-05)
Avalanche (02-06)
FITS:
Avalanche 2500: 2002 - 2006 (Front)
Express Van 3500 1 Ton: 2004 - 2010 (Front)
Hummer H2: 2002 - 2009 (Front)
K20/K2500 3/4 Ton (4WD): 1988 - 2000 (Front)...More Details »
This section is for 2014 and newer GM and Chevy Trucks.
Please see our tech article for more information. More Details »
FITS:
K10,K15 (90-Present)
K20, K25 (81-Present)
K30, K35 (89-Present)
C10, C15 (90-Present)
C20 (81-Present)
C30, C35 (83-Present)
H2 Hummer(02-Present)
This section is for 2014 and newer GM and Chevy Trucks with 6.2 Motor or Max Tow Package.
Please see our tech article for more information. More Details »
ECGS Products
terramite dana 44 rear axle parts bearings rebuild kit yoke companion flange 2-1-1881X,YOKE-TERRAMITE,2-1-1881X
Description: Includes:
Item 13 Part # 55130 Companion Flange Assembly
Dana Part # 2-1-1881X
Item #: YOKE-TERRAMITE
Condition:
New
Price: $310.00
abkr,abkr-,abkr-set10,ak set10,dana,terramite,dana 44,terramite dana 44 rear axle parts bearings rebuild kit
Description: Includes:
Item 37 Part # 55370 Shaft Axle Flanged
DOES NOT INCLUDE STUDS!!
Item #: AX:D44-TERRAMITE
Condition:
New
Price: $290.00
abkr,abkr-,abkr-set10,ak set10,dana,terramite,dana 44,terramite dana 44 rear axle parts bearings rebuild kit
Description: Includes:
Item 33 Part # 55330 Ring-Wheel Bearing Retaining Ring
Dana Part # 32755
Item 34 Part # 55340 Bearing Assembly
Dana Part # 565903
Item 35 Part # 55350 Seal Shaft Outboard
Dana Part # 35239
Item #: ABKR-SET10
Condition:
New
Price: $45.00
Terramite T5c, T7, T9 Ring and Pinion, or Gear & Pinion Ass'y-Drive Part # 64004 / 55020,D44-488
Description: TERRAMITE T5c, T7, T9 - GEAR & PINION ASSEMBLY-DRIVE
* ITEM 2 PART # 64004 or in some manuals Part# 55020 Ring and Pinion Gear set for Teramite Dana 44.
* Ring and pinion are only offered...More Details »
Item #: D44-488
Condition:
New
Price: $195.00
jeep, shaft, drive, drive shaft, driveshaft, 231, np231, slip, yoke, eliminator, SYE,d-shaft-tj
Description: Spicer CV Driveshaft for Jeep TJ - 1310
Item #: D-SHAFT-TJ
Condition:
New
Price: $435.00
Ford 8.8 axle swap parts, ebrake cables TJ Jeep Wrangler,ebc-tj,f8.8-tj-ebl
Description: If you have installed or are buying one of our 8.8 swap kits here are the ebrake cables you need to bolt up to your factory ebrake system.
Sold as a pair!
Item #: EBC-TJ/ZJ
Condition:
New
Price: $80.00
locker toyota spool,T8-SPOOL,YP FST8-30,Toyota 4 Cyl 8" Spool,30 Spline
Description: If you need complete traction and the lowest price without sacrificing strength.
Item #: T8-SPOOL-30
Condition:
New
Price: $164.00
Description: Full Kit Includes:
Wheel Bearing
Bearing Retainer Ring
Inner Axle Seal
Bearing O-Ring
Axle Bearing Washer
Axle Shaft Snap Ring
Item #: ABKR-TOY-FJ/4R-D
Condition:
New
Price: $240.00
Description: Full Kit Includes:
Wheel Bearing
Bearing Retainer Ring
Inner Axle Seal
Bearing O-Ring
Axle Bearing Washer
Axle Shaft Snap Ring
Item #: ABKR-TOY-FJ/4R-P
Condition:
New
Price: $240.00
toyota solid pinion spacer,toyota crush sleeve,toyota gears,toyota gear,SS-T7.5,TOYOTA 7.5" - SOLID SPACER,TOYOTA
Description: Protect your gear investment with one of these, keeps the preload on the pinion bearing, critical for rock crawlers, as a good smack from a rock to the pinion flange and it can crush the crush...More Details »
Item #: SS-T7.5
Condition:
New
Price: $45.00
toyota IFS gears 86-95,toyota front gear set,toyota 7.5 ring and pinion,toyota IFS 7.5,toyota ring gear pinion,toyota precision gears,precision gear,precision gears,yukon,T7.5-MIK-4CYL,YK T7.5-4CYL-FULL
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: T7.5-MIK-4CYL
Condition:
New
Price: $225.00
clamshell,t7,t7.5,bushing,t7.5-,t7.5-bushing,toyota,growl,tacoma,t7.5cs,cs,T7.5-BUSHING
Description: One Sintered PTFE Bushing, metal backed, bronze inlaid, PTFE coated CV axle bushing for Toyota 7.5" front clamshell differential. Fits 86 to 04 Pickups, T100, Tacoma, 99-06 Tundra and up to 02...More Details »
Item #: T7.5-BUSHING
Condition:
New
Price: $60.00
T7.5-BUSH-PULLER,TOYOTA 7.5" CLAMSHELL CV AXLE REMOVAL TOOL,CLAMSHELL,Toyota 7.5" Clamshell Bushing Removal Tool
Description: This is removal tool ONLY, this allows one to easily remove the stock needle Bearing.
For further information on the issue with the differential assembly please view our short tech video....More Details »
Item #: T7.5-BUSH-PULLER
Condition:
New
Price: $45.00
90903-63008, t7.5cs, t7.5, clamshell, bearing, passenger, side, passenger side, t7.5cs-, t7.5cs-tube, tube, tube bearing, t7.5cs-tube-, t7.5cs-tube-brg, brg
Description: This is the bearing in the passenger side tube of the T7.5 clamshell. It is a ball bearing OE replacement it is what supports the CV axle on Pass side directly behind axle seal.
Item #: T7.5CS-TUBE-BRG
Condition:
New
Price: $70.00
toyota IFS gears 86-95,toyota front gear set,toyota 7.5 ring and pinion,toyota IFS 7.5,toyota ring gear pinion,toyota precision gears,precision gear,precision gears,T7.5-BSK-P,PINSU3,T7.5,
Description: Pinion Set-Up Bearings are perfect for the master installer or the first timer. They are honed to slide on and off the bearing surface by hand allowing you to easily change the pinion shim to...More Details »
Item #: T7.5-BSK-P
Condition:
New
Price: $75.00
toyota IFS gears 86-95,toyota front gear set,toyota 7.5 ring and pinion,toyota IFS 7.5,toyota ring gear pinion,toyota precision gears,precision gear,precision gears,MK7.5,MK,7.5,MK T7.5-4CYL
Description: Kit includes:
-Pinion Nut
-Pinion Seal
-Crush Sleeve or preload shims
-Pinion Shims
-Adjustable Differential Shims
Item #: T7.5-MINI
Condition:
New
Price: $40.00
Toyota,V6,differential,rebiult, remanufactured,toyota,3rd,member,diff-build-t7.5
Description: Complete Assembled Toyota 7.5 Low Pinion 3rd member
Fits:
4Runner: 1986 - 1995 (Front)
Hilux Pickup: 1986 - 1997 (Front)
Pickup: 1986 - 1995 (Front)
***See below description for...More Details »
Item #: DIFF-BUILD-T7.5F
Condition:
New
Typical lead time is two weeks.
Price: $720.00
Toyota,V6,differential,rebiult, remanufactured,toyota,3rd,member,diff-build-t7.5
Description: Complete Assembled Toyota 7.5 Low Pinion 3rd member
Fits:
86-95 2wd Toyota Pick-up
***See below description for full details***
WE SHIP TO YOU FOR FREE, HOWEVER ALL INCOMING...More Details »
Item #: DIFF-BUILD-T7.5
Condition:
New
Typical lead time is two weeks.
Price: $720.00
90369-36009, t7.5, t7.5, clamshell, bearing, passenger, side, passenger side, t7.5-, t7.5-tube, tube, tube bearing, t7.5-tube-, t7.5-tube-brg, brg
Description: This is the bearing in the driver side tube of the T7.5 It is a ball bearing, it is what supports the CV axle on driver side directly behind axle seal.
Item #: T7.5-TUBE-BRG
Condition:
New
Price: $60.00
T7.5-MINI,MK T7.5-4CYL,Toyota 7.5 Reverse Mini Install kit
Description: Kit includes:
-Pinion Nut
-Pinion Seal
-Crush Sleeve
-Pinion Shims
Select to add carrier shims below.
Item #: T7.5-MINI
Condition:
New
Price: $19.99
toyota IFS gears 86-95, toyota front gear set, toyota 7.5 ring and pinion, toyota IFS 7.5, toyota ring gear pinion, toyota precision gears, precision gear, precision gears, yukon,T7.5-PIK,PIK,Toyota 7.5 Reverse- Yukon Pinion Install kit
Description: This kit is perfect for fixing a bad pinion bearing, but for new gear set-ups we recommend the Master Install kit.
-Pinion Bearings
-Pinion Nut
-Pinion Seal
-Crush Sleeve
-Pinion Shims
-Loctite
-Marking Compound
Item #: T7.5-PIK
Condition:
New
Price: $115.99
toyota IFS gears 86-95,toyota front gear set,toyota 7.5 ring and pinion,toyota IFS 7.5,toyota ring gear pinion,toyota precision gears,precision gear,precision gears,yukon,T7.5-MIK-V6,YK T7.5-V6-FULL
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: T7.5-MIK-V6
Condition:
New
Price: $240.00
SS-T4CYL,140059-1-KIT,TOYOTA 8' SOLID SPACER,TOYOTA,SOLID SPACER
Description: Protect your gear investment with one of these, keeps the preload on the pinion bearing, critical for rock cralwers, as a good smack from a rock to the pinion flange and it can crush the crush...More Details »
Item #: SS-T84CYL
Condition:
New
Price: $24.99
Toyota,V6,differential,rebiult, remanufactured,toyota,3rd,member,diff-build-t8
Description: Complete Assembled Toyota 8" 3rd member
Fits:
95 and older Toyota Pick-up and 4runners
***See below description for full details***
WE SHIP TO YOU FOR FREE, HOWEVER ALL INCOMING...More Details »
Item #: DIFF-BUILD-T8
Condition:
New
Typical lead time is two weeks.
Price: $695.00
Description: T8 to TV6 conversion bearing & race
Item #: T8-CB-V6CASE
Condition:
New
Price: $30.00
toyota solid pinion spacer,toyota crush sleeve,toyota gears,toyota gear,SS-T8CS,TOYOTA 8' V6/TURBO/ELD- SOLID SPACER,TOYOTA
Description: Protect your gear investment with one of these, keeps the preload on the pinion bearing, critical for rock crawlers, as a good smack from a rock to the pinion flange and it can crush the crush...More Details »
Item #: SS-T8CS
Condition:
New
Price: $45.00
41311-35100,T8CS-CASE-3-L-UOE,T8 Clamshell,loaded carrier,CASE
Description: T8 Clamshell used loaded carrier. For 3.73 & Down Gears. Required for vehicles regearing to 4.56 or 4.88 with a stock 3.90 or 4.10 ratio.
Item #: T8CS-CASE-3-L-UOE
Condition:
New
Price: $75.00
T8CS-BUSH-PULLER,TOYOTA 8" CLAMSHELL CV AXLE REMOVAL TOOL,Toyota 8" Clamshell Bushing Removal Tool
Description: This is removal tool ONLY, this allows one to easily remove the stock needle Bearing.
For further information on the issue with the differential assembly please view our short tech video....More Details »
Item #: T8CS-BUSH-PULLER
Condition:
New
Price: $45.00
90363-43001, t8cs, t8, clamshell, bearing, passenger, side, passenger side, t8cs-, t8cs-tube, tube, tube bearing, t8cs-tube-, t8cs-tube-brg, brg
Description: This is the bearing in the passenger side tube of the T8 clamshell. It is a ball bearing OE replacement it is what supports the CV axle on Pass side directly behind axle seal.
Fits 05 to present Toyota front axle tubes.
Item #: T8CS-TUBE-BRG
Condition:
New
Price: $35.00
Tacoma gears, tacoma e-locker parts bearings seals shims, rebuild kit for toyota e-locker, e-locker ELD elocker carrier bearings,TV6-MIK-ELOK-A,YK TV6,Toyota 8" E-Locker Install Kit -MASTER - 27 Spline pinion,MIK,MASTER INSTALL KIT
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve
Pinion Shims
Loctite
Marking Compound...More Details »
Item #: TV6-MIK-ELOC
Condition:
New
Price: $285.00
Toyota,V6,differential,rebiult, remanufactured,toyota,3rd,member,diff-build-tv6-hp
Description: Complete Assembled Toyota V6 3rd member
Fits:
85 and older Toyota Pick-up and 4runners
***See below description for full details***
Item #: DIFF-BUILD-TV6-HP
Condition:
New
Typical lead time is two weeks.
Price: $1,110.00
Toyota, 8, inch, 7.5, hi, lux, hilux, pick, up, pu, 4, cyl, cylinder, 1.5, 1.625, 1 1/2, 1 5/8, 1-1/2, 1-5/8, mik, master install kit, rebuild, ring, pinion, T8, gear, shim, shims, seals, crush sleeve, sleave, carrier, bearings, bearing, seal, axle, diffe
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: T8-MIK
Condition:
New
Price: $120.00
toy install kit, toyota 8 inch, rear end installation kit, toyota shims, toyota seal, pinion seal, set-up kit, set up kit, toyota gears, toyota ring and pinion, crush sleeve, pinion spacer
Description: Kit includes:
-Pinion Nut
-Pinion Seal
-Crush Sleeve or preload shims
-Pinion Shims
-Adjustable Differential Shims
Item #: T8-MINI
Condition:
New
Price: $28.00
Toyota pinion install kit,T8-PIK,PK T8-A,PIK,PINION INSTALL KIT,YUKON TOYOTA 8'' PINION INSTALL KIT
Description: This kit is perfect for fixing a bad pinion bearing, but for new gear set-ups we recommend the Master Install kit.
-Pinion Bearings
-Pinion Nut
-Pinion Seal
-Crush Sleeve
-Shims
-Loctite
-Marking Compound
Item #: T8-PIK
Condition:
New
Price: $99.00
land cruiser axle parts, LC high pinion diff, landcruiser HP, reverse rotation toyota axle, toyota gear, toyota gears, Landcruiser gears, Precision landcruiser gears, Landcruiser ring and pinion, landcruiser front axle gears,TLCF-MIK-A,YK TV6,MIK,MASTER I
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: TLCF-MIK
Condition:
New
Price: $305.00
land cruiser axle parts, LC high pinion diff, landcruiser HP, reverse rotation toyota axle, toyota gear, toyota gears, Landcruiser gears, Precision landcruiser gears, Landcruiser ring and pinion, landcruiser front axle gears, landcruiser pinion seal, land
Description: Kit includes:
-Pinion Nut
-Pinion Seal
-Crush Sleeve
-Pinion Shims
Item #: TLCF-MINI
Condition:
New
Price: $34.99
land cruiser axle parts, LC high pinion diff, landcruiser HP, reverse rotation toyota axle, toyota gear, toyota gears, Landcruiser gears, Precision landcruiser gears, Landcruiser ring and pinion, landcruiser front axle gears,TLC-PIK,PK TV6,PINION INSTALL
Description: This kit is perfect for fixing a bad pinion bearing, but for new gear set-ups we recommend the Master Install kit.
-Pinion Bearings
-Pinion Nut
-Pinion Seal
-Crush Sleeve
-Pinion Shims
-Loctite
-Marking Compound
Item #: TLC-PIK
Condition:
New
Price: $150.00
land cruiser axle parts, LC high pinion diff, landcruiser HP, reverse rotation toyota axle, toyota gear, toyota gears, Landcruiser gears, Precision landcruiser gears, Landcruiser ring and pinion, landcruiser front axle gears,TLCF-MIK-ELOK-EC,YK TV6
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: TLCF-MIK-ELOK
Condition:
New
Price: $325.00
toyota solid pinion spacer,toyota crush sleeve,toyota gears,toyota gear,SS-TV6,140060-1-KIT,TOYOTA 8' V6/TURBO/ELD- SOLID SPACER
Description: Protect your gear investment with one of these, keeps the preload on the pinion bearing, critical for rock cralwers, as a good smack from a rock to the pinion flange and it can crush the crush...More Details »
Item #: SS-TV6
Condition:
New
Price: $25.00
TOY/KITT,PK TV6,YUKON TOYOTA 8'' V6/Turbo/ Elocker PINION INSTALL KIT,PINION INSTALL KIT, TV6-PIK-a, TV6-PIK-b, TV6-PIK-
Description: This kit is perfect for fixing a bad pinion bearing, but for new gear set-ups we recommend the Master Install kit.
-Pinion Bearings (koyo)
-Pinion Nut
-Pinion Seal
-Crush Sleeve
-Pinion Shims
-Loctite
-Marking Compound
-Shims
Item #: TV6-PIK
Condition:
New
Price: $145.00
toyota gears, complete rebuild kit toyota 8 V6, toyota V6 rear end rebuild kit, seal, pinion seal, toyota pinion bearings bearing, toyota pinion seal, toyota pinion nut, crush sleeve, solid spacer, toyota shims,TV6-MIK-A,YK TV6,Toyota 8" V6 / Turbo Instal
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve
Pinion Shims
Loctite
Marking Compound...More Details »
Item #: TV6-MIK-A
Condition:
New
Price: $255.00
toyota gears, complete rebuild kit toyota 8 V6, toyota V6 rear end rebuild kit, seal, pinion seal, toyota pinion bearings bearing, toyota pinion seal, toyota pinion nut, crush sleeve, solid spacer, toyota shims,TV6-MIK-B,YK TV6,MIK,MASTER INSTALL KIT
Description: Toyota 8" V6 / Turbo master install kit for 29 spline pinions. For 2002 and newer or most aftermarket gears.
This is a full set up kit to do the job right. It includes:
Carrier bearings...More Details »
Item #: TV6-MIK-B
Condition:
New
Price: $265.00
Toyota,V6,differential,rebiult, remanufactured,toyota,3rd,member,diff-build-tv6
Description: Complete Assembled Toyota V6 3rd member
Fits:
86-95 V6 Toyota Pick-up and 4runners
96-2009 present 4runners without Elocker
07-09 FJ Cruiser without Elocker
You can also add...More Details »
Item #: DIFF-BUILD-TV6
Condition:
New
Typical lead time is two weeks.
Price: $755.00
T8CS CARRIER,Factory Toyota 3.90 and Up Carrier,Toyota 8.0 clamshell factory carrier,clamshell,CARRIER
Description: Factory Toyota carrier, you will need this carrier if you originally had 3.73 and want 4.10.
Item #: T8CS-CASE-4-UOE
Condition:
Used
Price: $100.00
Description: Protect your gear investment with one of these, keeps the preload on the pinion bearing, critical for rock crawlers, as a good smack from a rock to the pinion flange and it can crush the crush...More Details »
Item #: SS-T8.2K
Condition:
New
Price: $45.00
41201-80566, nitro, t8.2, toyota, ring, pinion, gear, nitro gear, Nitro Toyota 8.2" - 3.73 Ring & Pinion, 4.56, t8.2-, t8.2-456, t8.2-456-ng, ng
Description: Genuine Toyota 8.2 OEM 3.73 Ring And Pinion
Part# 41201-80566
Fits Rear 2010 - Current FJ Cruiser and 4runner w/ Elocker and Non Elocker
Tech Note: The easiest way to distinguish between 8...More Details »
Item #: T8.2-373-OE
Condition:
New
Price: $400.00
mik, t8.2, toyota, 8.2, master, master install, master install kit, kit, install, t8.2-, t8.2-mik, T8.2-MIK-ELOCK, MK T8.2
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: T8.2-MIK-ELOCK
Condition:
New
Price: $357.00
mik, t8.2, toyota, 8.2, master, master install, master install kit, kit, install, t8.2-, t8.2-mik, T8.2-MIK-ELOCK, MK T8.2
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: T8.2-MIK
Condition:
New
Price: $290.00
Description: Protect your gear investment with one of these, keeps the preload on the pinion bearing, critical for rock crawlers, as a good smack from a rock to the pinion flange and it can crush the crush...More Details »
Item #: SS-T8.75
Condition:
New
Price: $45.00
Description: Kit Contents:
Pinion Bearing & Race x2
Carrier Bearing & Race x2
Pinion Nut x1
Pinion Seal x1
Shim Kit x2
Crush Sleeve x1
Gasket x1
Marking Compound x1
Brush x1
Loctite x1
The Most...More Details »
Item #: T8.75-MIK
Condition:
New
Price: $450.00
90363-47002, t9r, t9, clamshell, bearing, passenger, side, passenger side, t9r-, t9r-tube, tube, tube bearing, t9r-tube-, t9r-tube-brg, brg
Description: This is the bearing in the passenger side tube of the T8 clamshell. It is a ball bearing OE replacement it is what supports the CV axle on Pass side directly behind axle seal.
Fits 05 to present Toyota front axle tubes.
Item #: T9R-TUBE-BRG
Condition:
New
Price: $20.00
T9R-BUSHING,TOYOTA 9" REVERSE CLAMSHELL CV AXLE BUSHING,BUSHING,T9
Description: One Sintered PTFE Bushing, metal backed, bronze inlaid, PTFE coated CV axle bushing for Toyota 9" Reverse front clamshell differential. Fits 2007 - 2021 Toyota Tundra Front. Replaces Driver side CV...More Details »
Item #: T9R-BUSHING
Condition:
New
Price: $60.00
T9R-BUSH-PULLER,TOYOTA 9" CLAMSHELL CV AXLE REMOVAL TOOL,CLAMSHELL,CV AXLE,REMOVAL TOOL,TOOL
Description: This is removal tool ONLY, this allows one to easily remove the stock needle Bearing.
For further information on the issue with the differential assembly please view our short tech video....More Details »
Item #: T9R-BUSH-PULLER
Condition:
New
Price: $45.00
lancruiser axle parts, landcruiser differential parts, aftermarket landcruiser gears, landcruiser ring and pinions, LC ring and pinion, precision landcruiser gears, precision gears, landcruiser precsion gears, landcruiser axle rebuild kit, landcruiser pin
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: TLC-MIK-B
Condition:
New
Price: $215.00
lancruiser axle parts, landcruiser differential parts, aftermarket landcruiser gears, landcruiser ring and pinions, LC ring and pinion, precision landcruiser gears, precision gears, landcruiser precsion gears, landcruiser axle rebuild kit, landcruiser pin
Description: Kit includes:
-Pinion Nut
-Pinion Seal
-Crush Sleeve
-Pinion Shims
-Differential Shims
Item #: TLC-MINI
Condition:
New
Price: $40.00
lancruiser axle parts, landcruiser differential parts, aftermarket landcruiser gears, landcruiser ring and pinions, LC ring and pinion, precision landcruiser gears, precision gears, landcruiser precsion gears, landcruiser axle rebuild kit, landcruiser pin
Description: This kit is perfect for fixing a bad pinion bearing, but for new gear set-ups we recommend the Master Install kit.
-Pinion Bearings
-Pinion Nut
-Pinion Seal
-Crush Sleeve
-Pinion Shims
-Loctite
-Marking Compound
Item #: TLC-PIK
Condition:
New
Price: $135.00
lancruiser axle parts, landcruiser differential parts, aftermarket landcruiser gears, landcruiser ring and pinions, LC ring and pinion, precision landcruiser gears, precision gears, landcruiser precsion gears, landcruiser axle rebuild kit, landcruiser pin
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: TLC-MIK-A
Condition:
New
Price: $200.00
Nitro master install bearings,T8CS-MIK,MK T8S-R,MASTER INSTALL KIT,Toyota Tacoma/ 4runner 8.0 Clamshell Front IFS Master Install Kit,MIK, YK TLC-REV-B
Description: This is a full set up kit to do the job right. It includes:
Pinion Bearing & Race x2
Carrier Bearing & Race x2
Axle Seal x2
Pinion Nut x1
Pinion Seal x1
Shim Kit
Crush...More Details »
Item #: T8CS-MIK
Condition:
New
Price: $340.00
Nitro master install bearings,T8CS-MINI,Toyota Tacoma/ 4runner 8.0 Clamshell Front IFS Mini Install Kit,MINI INSTALL KIT,MINI,
Description: Comes with pinion seal, crush sleeve, shims, axle seals, pinon nut, loctite, and marking compound. If you have low miles on your bearings and they look good, this kit will get the job done.
Item #: T8CS-MINI
Condition:
New
Price: $100.00
Description: T8CS, TV6-29 Pinion Seal - Fits 8" Reverse Clamshell and TV6 29 spline pinions
Item #: PS-TOY-41009-29SPL
Condition:
New
Price: $22.00