- Home »
- Catalog »
- Toyota Clamshell Bushings »
- 2005-2015 Toyota Tacoma
2005-2015 Toyota Tacoma
Shop ECGS Toyota Clamshell Bushings for 2005-2015 Tacoma 4WD applications. These 2nd Gen Tacoma trucks use the Toyota 8-inch IFS front clamshell differential, where the factory driver-side needle bearing can wear and allow CV axle shaft movement, gas-pedal vibration, growl, hum, or front-end drivetrain noise.
Choose the standalone bushing if you already have the correct ECGS tools, or choose the Complete Kit if you need the properly sized removal tool, installation tool, seal driver, and seal components for the Toyota 8-inch clamshell differential.
Browse 2005-2015 Toyota Tacoma Products
Popular Brands:
More About 2005-2015 Toyota Tacoma
2005-2015 Toyota Tacoma Clamshell Bushing
This category covers ECGS Toyota 8-inch clamshell bushing products for 2005-2015 Toyota Tacoma 4WD applications. These 2nd Gen Tacoma trucks commonly use the Toyota 8-inch IFS front clamshell differential, where the factory driver-side needle bearing can wear and allow excessive CV axle movement.
Common symptoms include front-end vibration, growling, humming, gas-pedal buzz, or a rhythmic “whomp-whomp” noise around 30-50 mph. The issue is often more noticeable after a lift, leveling kit, larger tires, or CV axle replacement because increased CV angle can add side load to the factory needle bearing.
A common quick check is to drive in 2WD, shift into 4HI where safe, and see whether the vibration goes away. If the vibration disappears in 4HI and returns in 2WD, the ECGS Clamshell Bushing is the correct upgrade to consider.
The ECGS PTFE clamshell bushing replaces the factory driver-side needle bearing to better support the CV axle under side load. For most DIY installations, the Complete Kit is recommended because it includes the correctly sized bushing, removal tool, installation tool, seal driver, and seal components for the Toyota 8-inch clamshell differential.