East Coast Gear Supply » ECGS
ECGS Categories
Lightweight rigs still need strong drivetrains. We stock Samurai ring and pinions, traction upgrades and the install kits that make setups clean and quiet.
If you need both wheels to put power to the ground these spools will get the job done at a reasonable price.
East Coast Gear Supply offers complete Toyota rear axles and upgrades in one place. Choose factory-style OE replacements for the 8.2 and T8.75 platforms, or step up to our bolt in Dana 60...More Details »
Toyota 4X4 gears, off-road ring and pinions, master install kits, pinion kits, mini install kits, axles, bearings, air lockers, solid spacers and more for your Toyota 4X4 or off-road truck or vehicle.
Toyota 7.5" gears, off-road ring and pinions, master install kits, pinion kits, mini install kits, axles, ujoints, bearings, air lockers, solid spacers and more for your Toyota 7.5 2WD pick-up,...More Details »
Toyota Tacoma 7.5" gears, 4X4 and off-road reverse ring and pinions, reverse master install kits, reverse mini install kits, reverse pinion kits, reverse IFS clamshell, bearings, air lockers,...More Details »
Toyota 8.0 Clamshell IFS front gears and install kits for the new Toyota FJ Cruiser, 05+ Toyota Tacomas and 4Runners. The Toyota 8.0 Clamshell IFS front gears and install kits are available in 4.56...More Details »
Toyota Tacoma 8" 4 cylinder, 4X4 and off-road ring and pinion gears, ring & pinion master install kits, mini install kits, pinion kits, differential housing, triple drilled flange, axles, ujoints,...More Details »
Toyota Tacoma 8" high pinion gears, 4X4 and off-road reverse ring and pinion, reverse master install kits, reverse mini install kits, reverse pinion kits, FJ-80 knuckle rebuild kit, differential...More Details »
Toyota 8" V6/Turbo/E-Locker gears, 4X4 and off-road ring and pinion, e-locker master install kits, e-locker mini install kits, e-locker pinion kits, e-locker pinion flange, differential housing,...More Details »
2016 & Newer Toyota Tacoma, Hilux & Fortuner with Automatic Trasmission and OEM E-Locker or Manual Transmission models
Toyota Landcruiser 9.5" gears, 4X4 and off-road ring and pinion, master install kits, mini install kits, pinion kits, FJ-80 knuckle rebuild kit, differential housing, triple drilled flange, axles,...More Details »
Toyota axle shaft kits, axles, and birfield joint upgrades for Toyota Landcruiser, Hilux Pickup, Toyota 4Runner, Toyota FJ40, FJ60, FJ80 and more featuring a Lifetime Warranty from Nitro....More Details »
Stop – Don't Let the Dealer Replace Your Whole Axle
If your Toyota Tacoma, Tundra, Sequoia, 4Runner, or FJ Cruiser has a subtle humming vibration in the gas pedal,...More Details »
Toyota Tacoma 8" non-ELD gears, 4X4 and off-road reverse ring and pinion, master install kits, mini install kits, pinion kits, FJ-80 knuckle rebuild kit, differential housing, triple drilled...More Details »
A full line of U-joints including CTM's, Spicer, Yukon Super Joints, and Driveshafts conversion joints. These are the best of the best, get good joints fast, don't settle for cheap auto parts store...More Details »
ECGS Products
14 bolt disc conversion brake drum kit pads rotors calipers,GM14T-DISC-BRAKE-KIT,GM14T-DISC-BRAKE,GM14T-DISC,DISC BRAKE,GM14,GM
Description: This is a complete bolt on kit to upgrade your drum brakes on your 14 Bolt to disc brakes.
Kit Includes:
Single Rear Wheel 3/8" Bracket
Mounting Hardware for Caliper to Bracket...More Details »
Item #: DBK-GM14T-WWB
Condition:
New
This item is shipped USPS. For any other shipping methods please call!!
Price: $795.00
Free Shipping on Orders $500 or more
14 bolt, steering, gm, 14, badass, axle, ECGS, reid, reid racing, spool, buggy, offroad, 14-bolt,CAA:GM14T,GM14T,GM,
Description: The ECGS steering 14 bolt features the highest quality parts available on the market. Using the bulletproof 14 Bolt center section we build the axle to your specifications.
The base price...More Details »
Item #: CAA:GM14T
Condition:
New
TYPICAL SHIP TIME IS 60-75 DAYS FROM DATE OF ORDER!!
Price: $1,520.00
14 bolt, steering, gm, 14, badass, axle, ECGS, reid, reid racing, spool, buggy, offroad, 14-bolt,CAA:GM14T,GM14T,GM,
Description: The ECGS steering 14 bolt features the highest quality parts available on the market. Using the bulletproof 14 Bolt center section we build the axle to your specifications.
The base price...More Details »
Item #: BOM-GM14T-F
Condition:
New
TYPICAL SHIP TIME IS 60-75 DAYS FROM DATE OF ORDER!!
Price: $2,250.00
axle protection armor rearend diff guards,DIFFERENTIAL COVER,DIF,GM14T-BSFW
Description: This HD steel diff cover features a 3/8 inch thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The GM 14 bolt full float HD steel diff cover...More Details »
Item #: BC-DCGM14T-AAM-FAB
Condition:
New
Price: $185.00
gm 14 bolt carrier case 4.10 and down case 3 series carrier gm chevy rockcrawler detroit,GM14T-CASE-3,G6258336,GM14T-CASE,GM14T,GM14,CASE,4.10
Description: Fits GM 14 Bolt/10.5" rear axle with 4.10 gears or numerically lower. Commonly referred to as a 3 series carrier. This is an OPEN carrier, does not come with spiders or cross shaft.
Item #: GM14T-CASE-3
Condition:
New
Price: $185.00
GM 14 Bolt Pinion Nut, 15552844, 15994582, YSPPN-014, pn, pn-, pinion, pinion nut, pn-014
Description: GM 14 Bolt Pinion Nut. 15/16" x 16
Item #: PN-014
Condition:
New
Price: $18.00
14 bolt, steering, gm, 14, badass, axle, ECGS, reid, reid racing, spool, buggy, offroad, 14-bolt,CAA:GM14T,GM14T,GM,
Description: The ECGS 14 bolt features the highest quality parts available on the market. Using the bulletproof 14 Bolt center section we build the axle to your specifications.
The base price includes:...More Details »
Item #: BOM-GM14T-FF-S1
Condition:
New
TYPICAL SHIP TIME IS 60-75 DAYS FROM DATE OF ORDER!!
Price: $2,000.00
14 bolt, steering, gm, 14, badass, axle, ECGS, reid, reid racing, spool, buggy, offroad, 14-bolt,CAA:GM14T,GM14T,GM,
Description: The ECGS 14 bolt features the highest quality parts available on the market. Using the bulletproof 14 Bolt center section we build the axle to your specifications.
The base price includes:...More Details »
Item #: CBOM-GM14T-FF-SR1
Condition:
New
TYPICAL SHIP TIME IS 60-75 DAYS FROM DATE OF ORDER!!
Price: $2,200.00
RGB-020,YSPBLT-020,GM 14 Bolt Ring Gear Bolts - 4.56 & Up Case
Description: GM 14 Bolt 4-series CASE Ring Gear Bolt - Long - 4.56 and up 4-Series CASE only. These are priced as ONE bolt!
Item #: RGB-020
Condition:
New
Price: $6.45
Description: Gain an additional 2 inches of ground clearance over stock with this kit. Bottom bolts are countersunk for extra bolt protection. Adds an additional bolt to the ring pattern to increase strength...More Details »
Item #: GM14T-SHAVEKIT-WDC
Condition:
New
Price: $499.99
GM 10.5 CORPORATE 14 BOLT SOLID SPACER CRUSHSLEEVE,SS-GM14T,GM 10.5 14 BOLT SOLID SPACER,GM14T,GM,SOLID SPACER, SS-GM14T, SS-GM14T-EC
Description: GM 10.5 CORPORATE 14 BOLT SOLID SPACER KIT, ADD THE EXTRA BIT OF CONFIDENCE TO YOUR 14 BOLT WITH THIS SOLID SPACER, NO MORE FIGHTING THE CRUSH SLEEVE, REPLACE PINION SEALS WITHOUT THE FEAR OF...More Details »
Item #: SS-GM14T
Condition:
New
Price: $45.00
gm14t,gm,14 bolt,coporate,wheel bearing seal kit,BKR,ABKR-,ABKR-gm14t,ak gm14t,gm14
Description: GM14T Full Float 10.5" - Rear Axle Bearing and Seal Kit - 1 Side - Includes Inner/Outer Bearings/Races and Seal
Outer Bearing - LM104949
Outer Race - LM104911
Inner Bearing - 387AS
Inner...More Details »
Item #: ABKR-GM14T
Condition:
New
Price: $85.00
GM, 14, bolt,ring,pinion,corporate,10.5,gears,GM14T-SHAVED-GEAR,SHAVED-GEAR,SHAVED,GEAR,GM14T
Description: With many popular 14 bolt shave kits on the market, we are now offering shaved 14 bolt gears for your convenience. These are the highest quality gears on the market. Shaved to 10.05", gears are pre shaved and ready to ship.
Item #: GM14T-SHAVED-GEAR
Condition:
New
Price: $450.00
GM,chevy,7.5,spider,gears,differential,parts,GM7.5-SPIDERS-26,GM7.5-SPIDERS,GM7.5,GM,SPIDERS
Description: This kit includes spider gears, side gears, thrust washers, Cross Shaft, and retainer Bolt/Pin. Available in 26 or 28 Spline
Item #: GM7.5-IPK-S-26
Condition:
New
Price: $90.00
GM,7.5,camaro,transam,firebird,master,install,kit,bearings,seals,shims,crush,sleeve,pinion,seal,axle,rebuild,GM7.5-MIK,MIK,GM7.5,
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: GM7.5-MIK
Condition:
New
Price: $125.00
gm, 10, bolt, 7.5, 7.6, gm 10 bolt, 10 bolt 7.5, posi, positraction, 28 spline, nitro, diff, differential, limited slip, carrier, bearings, kit, discount, wholesale, rock, climbing, 4x4, parts, 4x4 parts, off-road, sales, service, tools, raleigh nc, durham nc, raleigh, durham, nc, north carolina, east coast gear supply, ,YC G74038615,g74038615, GM7.6-CASE-4L, GM7.6-, GM7.6-CASE, GM7.6-CASE-
Description: *Standard open carrier case and spiders
*7.5" & 7.625" 28 spline applications
*3.23 & up ratio only
*Large and Small windows
Item #: GM7.6-CASE-4L
Condition:
New
Please Call for Availability
GM,chevy,7.6,spider,gears,differential,parts,GM7.6-SPIDERS-28,GM7.6-SPIDERS,GM7.6,GM
Description: Fits GM 7.5" open differential with 28 spline axles
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Item #: GM7.6-IPK-28
Condition:
New
Price: $105.00
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: GM8.0-MIK
Condition:
New
Price: $170.00
GM8.2, GM8.2-IPK, GM8.2-IPK-S, GM8.2-IPK-S-, GM8.2-IPK-S-28, OPEN, DIFFERENTIAL, SPIDERS
Description: *Spider gear kit
*Fits GM 8.2" open differential
*Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Item #: GM8.2-IPK-S-28
Condition:
New
Price: $190.00
GM 8.25" IFS Install Kit ('99 & Newer) - MASTER. This is a full set up kit to do the job right. It includes:
-Carrier bearings
-Pinion Bearings
-Pinion Nut
-Pinion Seal
-Crush Sleeve or preload shims
-Pinion Shims
-Carrier bearings
-Pinion Bearings
-Pinion Nut
-Pinion Seal
-Crush Sleeve or preload shims
-Pinion Shims
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve
Pinion Shims
Loctite
Marking Compound...More Details »
Item #: GM8.25IFS-MIK-A
Condition:
New
Price: $165.00
GM 8.25" IFS Install Kit ('99 & Newer) - MASTER. This is a full set up kit to do the job right. It includes:
-Carrier bearings
-Pinion Bearings
-Pinion Nut
-Pinion Seal
-Crush Sleeve or preload shims
-Pinion Shims
-Carrier bearings
-Pinion Bearings
-Pinion Nut
-Pinion Seal
-Crush Sleeve or preload shims
-Pinion Shims
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve
Pinion Shims
Loctite
Marking Compound...More Details »
Item #: GM8.25IFS-MIK-B
Condition:
New
Price: $175.00
Description: Kit includes:
-Pinion Nut
-Pinion Seal
-Crush Sleeve or preload shims
-Pinion Shims
Item #: GM8.25IFS-MINI
Condition:
New
Price: $19.99
Description: This kit is perfect for fixing a bad pinion bearing, but for new gear set-ups we recommend the Master Install kit.
-Pinion Bearings
-Pinion Nut
-Pinion Seal
-Crush Sleeve
-Pinion Shims
-Loctite
-Marking Compound
Item #: GM8.25IFS-PIK
Condition:
New
Price: $59.99
BSK-GM8.25IFS,PINSU1,BSK,BSK-,GM,GM8.25,PINION BEARING,KIT
Description: These bearings are perfect for the master installer or the first timer. They are honed to slide on and off the bearing surface by hand allowing you to easily change the pinion shim to achieve that...More Details »
Item #: BSK-GM8.25IFS
Condition:
New
Price: $79.99
Description: These high quality bearings are the same one's included in our Master Installation Kits. Provide long life and quiet operation. Includes both bearing and race. These are for use with 8.6 bearing...More Details »
Item #: GM8.5-CB-HD
Condition:
New
Price: $25.00
bearing, set up, set, up, removable, install, mik, bsk, f8.8-, f8.8-bsk, f8.8-bsk-, ford, 8.8, gm, 8.5
Description: These bearings are perfect for the master installer or the first timer. They are honed to slide on and off the bearing surface by hand allowing you to easily change the pinion shim to achieve that...More Details »
Item #: F8.8-BSK-P
Condition:
New
Price: $75.00
gm, 8.5, 8.5", 8.5 inch, 10 bolt, gm 10 bolt, spider gears, spider, gears, 28 spline, 30 spline, gear, ratio, axle, differential, locking, spline, posi-traction, rock, climbing, off-road, 4x4, competition, discount, wholesale, tools, parts, installation,
Description: GM 8.5 10 Bolt open spider gears for 28 spline axles.
**These fit open differentials only**
SEE OTHER TECH NOTES BELOW
Item #: GM8.5-IPK-S-28
Condition:
New
Price: $110.00
gm, 8.5, 8.5", 8.5 inch, 10 bolt, gm 10 bolt, spider gears, spider, gears, 28 spline, 30 spline, gear, ratio, axle, differential, locking, spline, posi-traction, rock, climbing, off-road, 4x4, competition, discount, wholesale, tools, parts, installation,
Description: GM 8.5 10 Bolt open spider gears for 30 spline axles.
**These fit open differentials only**
SEE OTHER TECH NOTES BELOW
Item #: GM8.5-IPK-S-30
Condition:
New
Price: $110.00
gm8.5,gm 8.6,bolt,wheel bearing,seal kit 10,abkr,abkr-,abkr-c10-gm8.5/8.6,ak c10,c10,c10-gm8.5/8.6,8.5,8.6,gm,c10-
Description: GM 8.5" and 8.6" - Rear Axle Bearing and Seal Kit - 1 Side - Includes Bearing and Seal
2.800" Outside Diameter / 1.620" Inside Diameter
Item #: ABKR-C10-GM8.5/8.6
Condition:
New
Price: $35.00
chevy,gm,10,bolt,spiders,spider,gear,kit,8.6,1500,suburban,GM8.6-IPK-S-30,GM8.6-IPK,YPKGM8.6-S-30V2
Description: This kit includes spider gears, side gears, and thrust washers, Cross shaft, and cross shaft retainer bolt. This kit fits cases 2000 and up with one large and one small window, or the 2 large...More Details »
Item #: GM8.6-IPK-S-30
Condition:
New
Price: $115.00
GM9.25IFS-MIK,GM9.25,GM,MIK,MASTER INSTALL KIT,YUKON GM 9.25
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: GM9.25IFS-MIK
Condition:
New
Price: $280.00
GM9.25IFS-MINI,GM9.25,GM,YUKON GM9.25,mini,GM9.25IFS
Description: Kit includes:
-Pinion Nut
-Pinion Seal
-Crush Sleeve or preload shims
-Pinion Shims
-Adjustable Differential Shims
Item #: GM9.25IFS-MINI
Condition:
New
Price: $39.00
Yukon 9.25 Pinion Install kit 9 1/4 differentia bearings crush sleeve pinion seal,GM9.25IFS-PIK,GM9.25IFS,GM9.25
Description: This kit is perfect for fixing a bad pinion bearing, but for new gear set-ups we recommend the Master Install kit.
-Pinion Bearings
-Pinion Nut
-Pinion Seal
-Crush Sleeve
-Pinion Shims
-Loctite
-Marking Compound
Item #: GM9.25IFS-PIK
Condition:
New
Price: $140.00
GM9.25IFS-MIK-B,GM9.25,GM,MIK,MASTER INSTALL KIT,YUKON GM 9.25, YK GM9.25IFS-B
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: GM9.25IFS-MIK-B
Condition:
New
Price: $400.00
GM 9.5 12 Bolt Yoke Conversion Kit,GM9.5B-MIK,GM9.5B,GM9.5,GM,MIK,MASTER INSTALL KIT, YK GM9.5-12B
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: GM9.5B-MIK
Condition:
New
Price: $300.00
GM9.5-MIK-A,GM9.5-MIK,GM9.5,GM,GM9.5-A,MASTER INSTALL KIT
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve
Pinion Shims
Loctite
Marking Compound...More Details »
Item #: GM9.5-MIK-A
Condition:
New
Price: $280.00
GM9.5-MIK-B-TK,GM9.5-MIK-B,GM9.5-MIK,GM9.5,GM,MASTER INSTALL KIT,GM9.5-B
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: GM9.5-MIK-B
Condition:
New
Price: $300.00
PINSU6,GM 9.5 14 BOLT SEMI FLOAT PINION BEARING SET UP KIT,PINION BEARING
Description: These bearings are perfect for the master installer or the first timer. They are honed to slide on and off the bearing surface by hand allowing you to easily change the pinion shim to achieve that...More Details »
Item #: GM9.5-BSK-P
Condition:
New
Price: $79.99
GM9.5-MINI,GM9.5-A,GM9.5,GM,MINI,PINION NUT
Description: Kit includes:
-Pinion Nut
-Pinion Seal
-Crush Sleeve or preload shims
-Pinion Shims
-Adjustable Differential Shims
Item #: GM9.5-MINI
Condition:
New
Price: $39.99
GM9.5-PIK,GM9.5-A,GM9.5,GM,PINION INSTALL KIT,PIK
Description: This kit is perfect for fixing a bad pinion bearing, but for new gear set-ups we recommend the Master Install kit.
-Pinion Bearings
-Pinion Nut
-Pinion Seal
-Crush Sleeve or preload shims...More Details »
Item #: GM9.5-PIK
Condition:
New
Price: $170.00
GM9.5, 9.5B, 12 BOLT, CHEVY, 1500, 2014, SPACER, RING, RINGER GEAR, RING GEAR SPACER, GM9.5B-RG-SPACER, GM9.5B-, GM9.5B-RG, GM9.5B-RG-
Description: Conversion spacer GM 9.5 AND GM 9.76 12 bolt differentials, required for 3.08 AND 3.23 factory ratios! Or with Detroit True Trac or Dura Grip.
Item #: GM9.5B-RG-SPACER
Condition:
New
Price: $85.00
YK GM9.76-CONV, GM9.76-MIK-CONV, gm9.76, chevy, gm, 6.2, 6.2L
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve
Pinion Shims
Loctite
Marking Compound...More Details »
Item #: GM9.76-MIK-CONV
Condition:
New
Price: $475.00
YK GM9.76, GM9.76-MIK, gm9.76, chevy, gm, 6.2, 6.2L
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve
Pinion Shims
Loctite
Marking Compound...More Details »
Item #: GM9.76-MIK
Condition:
New
Price: $380.00
Description: GM 14 Bolt Wheel Seal. Fits Full Float Only.
Item #: ABKSR-GM14T
Condition:
New
Price: $7.00
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve
Complete Shim Kit
Ring Gear Bolts
Axle...More Details »
Item #: GM7.2IFS-MIK-C
Condition:
New
Price: $211.00
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve
Complete Shim Kit
Ring Gear Bolts
Axle...More Details »
Item #: GM7.2IFS-MIK-A
Condition:
New
Price: $237.00
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve
Complete Shim Kit
Ring Gear Bolts
Axle...More Details »
Item #: GM7.2IFS-MIK-B
Condition:
New
Price: $230.00
case,carrier,GM,8.25,yukon,gears,ring,and,pinion,chevy,1500,GM8.25IFS-CASE,GM8.25IFS,GM8.25IFS.GM8.25,GM,G26018131
Description: *Standard open carrier case
*Fits GM 8.25"
*3.42 and up ratio only
*Does not include spider gears
***DOES NOT FIT AWD APPLICATIONS***
Item #: GM8.25IFS-CASE-E
Condition:
New
Price: $155.00
rear end tools, housing spreader, differential repair tools, diff tools axle tool housing spreader,TOOL-HOUSESPREAD,TOOL-HOUSESPREAD-EC,Dana 30, 44, 60, 70, 80 HOUSING SPREADER
Description: Housing spreader for Dana Spicer 30, 44, 60, 61, 70, and 80. The housing spreader allow you to safely & easily set carrier bearing preload, saving time and money. HOUSING SPREADER IS HIGHLY...More Details »
Item #: TOOL-HOUSESPREAD
Condition:
New
Price: $270.00
torque, wrench, torque wrench, pinion, preload, pinion preload, set, set up, setup, diff,TOOL-TW-ILBS,2295D,Inch Pound Torque Wrench
Description: *Beam Style for Setting Pinion Preload
*0-80 Inch Pounds
*Ball Type Handle on the Inch/pound Version Localizes Force for Better Accuracy
*Satin Finish Scale Reduces Glare for Easier Reading...More Details »
Item #: TOOL-TW-ILBS
Condition:
New
Price: $65.00
jeep, grand cherokee, wk, xk, master install kit, master, install, kit, mik, c200, yk c200,C200-MIK
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: C200-MIK
Condition:
New
Price: $315.00
K3128, D30-UCA-BUSHING, D30, d44, D30-, D30-UCA-, uca, dana 30, dana 44, tj, xj, zj, jeep, bushing, upper, upper control arm, control arm, control arm bushing.
Description: Jeep Dana 30 and 44 Upper Control Arm Bushing. Sold as a pair!
Item #: D30-UCA-BUSHING
Condition:
New
Price: $20.00
disc brake conversion,jeep,disc,brake,tj,1997,G/296-2049-DB,dbk-tjr
Description: Dramatically increase your braking power by upgraded your drums to this performance rear disc brake kit.
Kit Includes:
*Two Premium Rotors (5x4.5 & 5x5.5 Drilled)
*Premium Pads
*Two New...More Details »
Item #: DBK-TJR
Condition:
New
Price: $600.00
jeep, brakes, brake, brake line, line, extended, lift, blk, blk-, blk, BLK-TJ-F-2-24, BLK-TJ,
Description: Kit Includes:
*2 - Dot Approved 24" Stainless Brake Lines
*2 - Mounting Brackets
*2 - Retaining Clips
*4 - Copper Washers (Not Pictured)
Item #: BLK-TJ-F-2-24
Condition:
New
Price: $75.00
Description: Axle Bearing & Seal Kit, Jeep M220 Rear JL Rubicon & JT, 3.149" OD
This does not fit JL Non Rubicon models with the M220 Rear Axle - Please see: ABKR-D35JL/D44JL for the correct kit for your Jeep
Two required per vehicle
Item #: ABKR-SET80-JLR
Condition:
New
Price: $115.00
D35JL-PBO-CONV, D35JL, D35JL-, D35JL-pbo, D35JL-pbo-, JEEP, JL, JEEP JL, 2018, 2018 JEEP, 2018 JEEP JL, ADVANTEK, M200, 200MM jl conversion, jl conversion bearing, d35jl conversion, d35jl pinion bearing conversion, pinion bearing conversion, ball bearing delete, ball bearing conversion.
Description: Complete conversion kit for ball bearing outer pinion bearing conversion on JL Dana 35 Advantek Rear Axle. Includes Solid Spacer.
Item #: D35JL-PBO-CONV
Condition:
New
Price: $125.00
10040452, JEEP, JL, JEEP JL, 2018 JEEP, 2018 JEEP JL, DANA 35, D35JL-MIK, D35JL, D35JL-, 10040452, 200MM, M200, YK D35JL-REAR
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: D35JL-MIK
Condition:
New
Price: $210.00
10040452, JEEP, JL, JEEP JL, 2018 JEEP, 2018 JEEP JL, DANA 35, D35JL-MIK, D35JL-MIK-CONV, D35JL, D35JL-, 10040452, 200MM, M200, YK D35JL-REAR, jl conversion, jl conversion bearing, d35jl conversion, d35jl pinion bearing conversion, pinion bearing conversion, ball bearing delete, ball bearing conversion.
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Conversion Outer Pinion Bearing (No Ball Bearing)
Inner Pinion Bearing
Pinion Nut
Pinion Seal
Solid...More Details »
Item #: D35JL-MIK-CONV
Condition:
New
Price: $270.00
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve
Pinion Shims
Loctite
Marking Compound...More Details »
Item #: D44JL-MIK-R
Condition:
New
Price: $235.00
D44JL, D44JL-, D44JL-MIK, JEEP, JL, JEEP JL, 2018 JEEP, 2018 JEEP JL, M220, 10040478, DANA 44, 220MM, YK D44JL-REAR, D44JL-MIK-R-CONV, jl conversion, jl conversion bearing, d44jl conversion, d44jl pinion bearing conversion, pinion bearing conversion, ball bearing delete, ball bearing conversion.
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Conversion Outer Pinion Bearing (No Ball Bearing)
Inner Pinion Bearing
Pinion Nut
Pinion Seal
Solid...More Details »
Item #: D44JL-MIK-R-CONV
Condition:
New
Price: $285.00