East Coast Gear Supply » ECGS
ECGS Categories
Lightweight rigs still need strong drivetrains. We stock Samurai ring and pinions, traction upgrades and the install kits that make setups clean and quiet.
If you need both wheels to put power to the ground these spools will get the job done at a reasonable price.
East Coast Gear Supply offers complete Toyota rear axles and upgrades in one place. Choose factory-style OE replacements for the 8.2 and T8.75 platforms, or step up to our bolt in Dana 60...More Details »
Toyota 4X4 gears, off-road ring and pinions, master install kits, pinion kits, mini install kits, axles, bearings, air lockers, solid spacers and more for your Toyota 4X4 or off-road truck or vehicle.
Toyota 7.5" gears, off-road ring and pinions, master install kits, pinion kits, mini install kits, axles, ujoints, bearings, air lockers, solid spacers and more for your Toyota 7.5 2WD pick-up,...More Details »
Toyota Tacoma 7.5" gears, 4X4 and off-road reverse ring and pinions, reverse master install kits, reverse mini install kits, reverse pinion kits, reverse IFS clamshell, bearings, air lockers,...More Details »
Toyota 8.0 Clamshell IFS front gears and install kits for the new Toyota FJ Cruiser, 05+ Toyota Tacomas and 4Runners. The Toyota 8.0 Clamshell IFS front gears and install kits are available in 4.56...More Details »
Toyota Tacoma 8" 4 cylinder, 4X4 and off-road ring and pinion gears, ring & pinion master install kits, mini install kits, pinion kits, differential housing, triple drilled flange, axles, ujoints,...More Details »
Toyota Tacoma 8" high pinion gears, 4X4 and off-road reverse ring and pinion, reverse master install kits, reverse mini install kits, reverse pinion kits, FJ-80 knuckle rebuild kit, differential...More Details »
Toyota 8" V6/Turbo/E-Locker gears, 4X4 and off-road ring and pinion, e-locker master install kits, e-locker mini install kits, e-locker pinion kits, e-locker pinion flange, differential housing,...More Details »
2016 & Newer Toyota Tacoma, Hilux & Fortuner with Automatic Trasmission and OEM E-Locker or Manual Transmission models
Toyota Landcruiser 9.5" gears, 4X4 and off-road ring and pinion, master install kits, mini install kits, pinion kits, FJ-80 knuckle rebuild kit, differential housing, triple drilled flange, axles,...More Details »
Toyota axle shaft kits, axles, and birfield joint upgrades for Toyota Landcruiser, Hilux Pickup, Toyota 4Runner, Toyota FJ40, FJ60, FJ80 and more featuring a Lifetime Warranty from Nitro....More Details »
Stop – Don't Let the Dealer Replace Your Whole Axle
If your Toyota Tacoma, Tundra, Sequoia, 4Runner, or FJ Cruiser has a subtle humming vibration in the gas pedal,...More Details »
Toyota Tacoma 8" non-ELD gears, 4X4 and off-road reverse ring and pinion, master install kits, mini install kits, pinion kits, FJ-80 knuckle rebuild kit, differential housing, triple drilled...More Details »
A full line of U-joints including CTM's, Spicer, Yukon Super Joints, and Driveshafts conversion joints. These are the best of the best, get good joints fast, don't settle for cheap auto parts store...More Details »
ECGS Products
D44JLF-MIK, D44JLF, D44JLF-, D44JL, JEEP, JL, JEEP JL, 2018 JEEP, 2018 JEEP JL, M210, 10040469, 210MM, YK D44JL-FRONT
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve
Pinion Shims
Loctite
Marking Compound...More Details »
Item #: D44JL-MIK-F
Condition:
New
Price: $245.00
D44JL-PBO-CONV, D44JL, D44JL-, D44JL-pbo, D44JL-pbo-, JEEP, JL, JEEP JL, 2018 JEEP, 2018 JEEP JL, M220, 220MM, jl conversion, jl conversion bearing, d44jl conversion, d44jl pinion bearing conversion, pinion bearing conversion, ball bearing delete, ball bearing conversion.
Description: Complete conversion kit for ball bearing outer pinion bearing conversion on JL Dana 44 Advantek Rear Axle. Includes Solid Spacer.
Item #: D44JL-PBO-CONV
Condition:
New
Price: $125.00
SS-D44JLF, Crush, sleeve, eliminator, JEEP, JL, JEEP JL, 2018 JEEP, 2018 JEEP JL, M210, 210MM, jl conversion, jl conversion bearing, d44jl conversion, pinion bearing conversion, gladiator
Description: Solid Spacer and shims. Crush sleeve eliminator for Dana 44 (210mm) front axle available in Jeep Wrangler JL Rubicon, Diesel Sport, Diesel Sport S, Diesel Sahara, and Jeep Gladiator.
Item #: SS-D44JLF
Condition:
New
Price: $45.00
SS-D44JL, Crush, sleeve, eliminator, JEEP, JL, JEEP JL, 2018 JEEP, 2018 JEEP JL, M220, 220MM, jl conversion, jl conversion bearing, d44jl conversion, pinion bearing conversion,
Description: Solid Spacer and shims. Crush sleeve eliminator for Dana 44 (220mm) rear axle available in Jeep Wrangler JL Rubicon, Willys, some Sahara and Jeep Gladiator.
Item #: SS-D44JL
Condition:
New
Price: $45.00
Ebrake cables for jeep wrangler jl disc brake conversion,cables cheap,ebc-jl, jl, ultimate 60, ud60, jeep, jeep jl, wrangler, cable, cables, e-brake cables
Description: If you have installed or are buying JL Ultimate Dana 60 here are the ebrake cables you need to bolt up to your factory JL E-brake system.
Sold as a pair!
Item #: EBC-JL-R8
Condition:
New
Price: $150.00
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: D30JL-MIK
Condition:
New
Price: $260.00
Description: Spindle nut socket for JK Ultimate Dana 60. Will fit normal Dana 60 applications as well.
Item #: TOOL-SPINSOCK-04
Condition:
New
Price: $40.00
King pin,kingpin,tool,removal,TOOL-KP,DANA 60 KING PIN REMOVAL TOOL
Description: This is a 2" piece of chromoly hex stock that fits into your king pin and allows you to use a 7/8 socket to remove the king pin.
Item #: TOOL-KP
Condition:
New
Price: $10.00
ax:aam9.25-faa-short,aam,aam9.25,aam9.25-,axle, shaft,axle shaft,ya c5086667ab
Description: 27.0" long long
Fits 2003-2008 Chrysler 9.25" front
Left hand side assembly
Item #: AAM9.25-FAA-SHORT-01
Condition:
New
Price: $285.00
Description: Mahindra Roxor Front and Rear Gear Package.
Includes:
4.10 Front and Rear Gears
Front and Rear Install Kits
Item #: GP-MH44-410-3
Condition:
New
Price: $698.00
Description: Mahindra Roxor Front and Rear Gear Package.
Includes:
4.10 Front and Rear Gears
Front and Rear Install Kits
Item #: GP-MH44-410-4
Condition:
New
Price: $698.00
Description: Mahindra Roxor Front and Rear Gear Package.
Includes:
4.10 Front and Rear Gears
Front and Rear Install Kits
Ring Gear Spacers
Item #: GP-MH44-410
Condition:
New
Price: $698.00
Description: Mahindra Roxor Front and Rear Gear Package.
Includes:
4.56 Front and Rear Gears
Front and Rear Install Kits
Item #: GP-MH44-456-3
Condition:
New
Price: $698.00
Description: Mahindra Roxor Front and Rear Gear Package.
Includes:
4.56 Front and Rear Gears
Front and Rear Install Kits
Item #: GP-MH44-456-4
Condition:
New
Price: $698.00
Description: Mahindra Roxor Front and Rear Gear Package.
Includes:
Front and Rear Gears
Front and Rear Install Kits
Ring Gear Spacers
Item #: GP-MH44-456
Condition:
New
Price: $698.00
Description: Mahindra Roxor Front and Rear Gear Package.
Includes:
4.88 Front and Rear Gears
Front and Rear Install Kits
Item #: GP-MH44-488-3
Condition:
New
Price: $698.00
Description: Mahindra Roxor Front and Rear Gear Package.
Includes:
4.88 Front and Rear Gears
Front and Rear Install Kits
Item #: GP-MH44-488-4
Condition:
New
Price: $698.00
Description: Mahindra Roxor Front and Rear Gear Package.
Includes:
4.88 Front and Rear Gears
Front and Rear Install Kits
Item #: GP-MH44-488
Condition:
New
Price: $698.00
Description: Mahindra Roxor Front and Rear Gear Package.
Includes:
5.13 Front and Rear Gears
Front and Rear Install Kits
Item #: GP-MH44-513-3
Condition:
New
Price: $698.00
Description: Mahindra Roxor Front and Rear Gear Package.
Includes:
5.38 Front and Rear Gears
Front and Rear Install Kits
Front Axle Seals
Item #: GP-MH44-538-3
Condition:
New
Price: $698.00
Description: Mahindra Roxor Front and Rear Gear Package.
Includes:
5.38 Front and Rear Gears
Front and Rear Install Kits
Front Axle Seals
Item #: GP-MH44-538-4
Condition:
New
Price: $698.00
Description: Mahindra Roxor Front and Rear Gear Package.
Includes:
5.38 Front and Rear Gears
Front and Rear Install Kits
Ring Gear Spacers
Item #: GP-MH44-538
Condition:
New
Price: $698.00
Dana 44 Roxor Ring Gear Spacer for Aftermarket Gears or Carrier
Description: Dana 44 Roxor Ring Gear Spacer for Aftermarket Gears or Carrier
Item #: MH44-R/G-SPACER
Condition:
New
Dana 44 Roxor Ring Gear Spacer for Aftermarket Gears or Carrier .156 THICK
* Required if using standard 44 Gears and Facto
* Required if using standard 44 Gears and Facto
Price: $35.00
f9.75, f9.75-mik, f9.75-, f9.75-mik-b, f9.75-mik-, ford, 9.75, master, install, kit, master install kit, mik, install kit,
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: F9.75-MIK-CNV-J
Condition:
New
Price: $340.00
f9.75, f9.75-mik, f9.75-, f9.75-mik-b, f9.75-mik-, ford, 9.75, master, install, kit, master install kit, mik, install kit,
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: F9.75-MIK-CNV-K
Condition:
New
Price: $355.00
Description: Ring gear bolt for AMC Model 20, “Super” 35, Dana Spicer “Super” 30 and Dana Spicer 50
7/16"x20 Thread
Item #: RGB-010
Condition:
New
Price: $1.00
f8.8r-, f8.8r. f8.8r-488, f8.8r-4.88, f8.8r-488-ec, ring, pinion, ring & pinion, gear, ford, 8.8, 8.8 reverse,
Description: Motive ring and pinions are forged out of 8620 Steel. They are known for their strength and reliability. This is a high performance Quiet gear, perfect for any vehicle from Stock and beyond, it...More Details »
Item #: F8.8R-488R-MGHP
Condition:
New
Price: $285.00
YHC63630, WH-, WH-D60, WH-D60-f8, WH-D60-f8-, WH-D60-f8-YG, YUKON, HUB, DANA 60, D60, ford, FORD, WHEEL, WHEEL HUB, TKA20332, TKA4923
Description:
Hub
Fits 78-97 Ford Dana Spicer 60
8 x 6.5" bolt pattern
Yukon Hardcore drive flange kits and hubs provide the ultimate in strength and performance for serious off-road applicationsMore Details »
Item #: WH-D60-F8-YG
Condition:
New
Price: $300.00
, titan, nissan, master, install, kit, master install kit, bearings, mik,TITAN-MIK-F-YK,YK NM205,Nissan Titan Master Install Kit - Front
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: TITAN-MIK-F
Condition:
New
Price: $314.44
titan, nissan, master, install, kit, master install kit, bearings, mik,TITAN-MIK-R-YK,YK NM226,Nissan Titan Master Install Kit
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: TITAN-MIK-R
Condition:
New
Price: $210.00
Suzuki,Samurai, SUZSAM-457-NG, SUZSAM-, SUZSAM-457, SUZSAM-457-, SAMI-457-NG, sami-
Description: All Nitro Gears are computer-controlled forgings, forged out of 8620 Steel, fully automated turning, Single pass cut, and then vacuum heat treated, the sum of these processes is the ultimate...More Details »
Item #: SAMI-457-NG
Condition:
New
Price: $150.00
Suzuki,Samurai, SUZSAM-538-NG, SUZSAM-, SUZSAM-538, SUZSAM-538-, SAMI-538-NG, sami-
Description: All Nitro Gears are computer-controlled forgings, forged out of 8620 Steel, fully automated turning, Single pass cut, and then vacuum heat treated, the sum of these processes is the ultimate...More Details »
Item #: SAMI-538-NG
Condition:
New
Limited Supply: Only 1 Left!
Price: $150.00
Jeep dodge chrysler chevy gm gmc gmac 231 np-231 np new process transfer case t-case rebuild kit wrangler xj yj cherokee tj,TC:231-MRK-*,BK231
Description: Complete Transfer Case Rebuild Kits Include:
-Bearings
-Seals
-Gaskets or RTV
-Chain
-Fork Pads
Please select the correct Rebuild Kit for you Transfer Case. Measure your input bearing if...More Details »
Item #: TC:231-MRK::
Condition:
New
Price: $205.00
Dodge chevy NV4500 5th gear nut,TR-NV4500-MK,T308RMK- RLMK,NV4500 Transmission Master Rebuild kit
Description: Master Kits Include:
-Main Bearings
-Kevlar Synchros
-Seals
-Gaskets
-Small Parts kit (Optional)
These are the highest quality Kits available, with only factory equivalent replacement...More Details »
Item #: TR-NV4500-MK
Condition:
New
Price: $299.00
reamer. tie rod, rod, tie, one, ton, one-ton,TOOL-REAMER-7/8,R121,One Ton Tie Rod Reamer 7/8
Description: This reamer is meant to ream out knuckles to accept standard one ton tie rod ends. Made out of high quality materials to resist dulling.
Item #: TOOL-REAMER-7/8
Condition:
New
Price: $100.00
Warn Hubs Dana 60 Premium assembly, 62672, dana 60, wheel, hub, wheel hub, chevy, dana,WH-D60-C8-OE,177703
Description: Single Wheel Hub. Comes with:
Wheel Hub
Rotor
Studs
Item #: WH-D60-C8-EC
Condition:
New
Price: $325.00
Free Shipping on Orders $500 or more
SKPD-GM14T, SKPD, GM14T, GM14, 14T, 14 BOLT
Description:
Pinion depth shims for GM 10.5" 14 bolt truck
Item #: SKPD-GM14T
Condition:
New
Price: $12.00
Pinion Nut - 010 (PN-010), pinion, pinion nut, pn, Jeep JK, Dana Spicer, 44HD, 60, 70, 70U, 70HD and Nissan Titan rear,PN-010
Description:
Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
7/8" x 14 thread
1 5/16" socket
Item #: PN-010
Condition:
New
Price: $6.50
D25, D27, D30, D36, D44, D50, GM7.75 BW 9-Bolt Pinion Nut - 3/4" x 16 - Ref DS 30185 / YSPPN-009,PN-009
Description:
D25, D27, D30, D36, D44, D50, GM7.75 BW 9-Bolt Pinion Nut
3/4" x 16 - Ref DS 30185 / YSPPN-009
Item #: PN-009
Condition:
New
Price: $6.50
YSPPN-018,PN-018,PINION NUT,PINIONPINION NUT 018
Description:
Pinion nut for GM 7.2", 7.5", 7.625", 8.0", 8.25" IFS, 8.5", 8.6", 9.25" IFS and 9.5"
7/8" x 14 thread
1 1/4" socket
Item #: PN-018
Condition:
New
Price: $7.50
3604,47680,YMS3604,PS-3604-F8.8,Pinion Seal for Ford 7.5,Ford 8.8IFS,Ford 8.8IRS,Ford 9.75
Description: Pinion Seal for Ford 7.5, Ford 8.8IFS, Ford 8.8, Ford 8.8IRS, Ford 9 (85-86), Ford 9.75
Item #: PS-3604-F8.8
Condition:
New
Price: $9.50
D25,D27,D30,D36,D44,D50 Pinion Seal,5778,NS 5778,YMS5778,44895,PS-5778-D30/D44
Description: D25, D27, D30, D36, D44, D50 Pinion Seal - Ref 5778 / NS 5778 / YMS5778 / 44895
Item #: PS-5778-D30/D44
Condition:
New
Price: $12.00
D30JK and 44JK Front Pinion Seal,Fits Dana 30 JK Front and Dana 44 JK Rev Rubicon Front,YMSC1020,68004072AA,2004670,PS-1020-D30JK/D44JKF
Description: D30JK and 44JK Front Pinion Seal - Fits Dana 30 JK Front and Dana 44 JK Rev Rubicon Front - Ref: YMSC1020, 68004072AA, 2004670
Item #: PS-1020-D30JK/44JKF
Condition:
New
Price: $20.00
YMS3896, 47904, 4012694, 3896, PS-3896-GM9.5-E, PS-, PS-3896, PS-3896-, PS-3896-GM9.5, PS-3896-GM9.5-
Description: Pinion Seal for GM 9.5 (79-97)
Item #: PS-3896-GM9.5-E
Condition:
New
Price: $12.00
rear end axle differential tool,RENT-BPULLER,TRP-1
Description: Here are two essential tools to getting a quality set-up. If you are only setting up 1 or 2 axles it may not be worth investing all the money in set up tools. These two tools will allow you to get...More Details »
Item #: TOOL-RENT-BPULLER
Condition:
Used
Price: $400.00
Description: Fits Ford and Dodge applications
Includes axle bearing and seal
Torrington Brand
Services one side
2.985" O.D.
1.700" I.D.
Item #: ABKR-1561-FD
Condition:
New
Price: $35.00
YHC63629, WH-, WH-D60, WH-D60-c8, WH-D60-C8-, WH-D60-C8-YG, YUKON, HUB, DANA 60, D60, ford, CHEVY, DODGE, WHEEL, WHEEL HUB,
Description:
Hub
Fits Chevy/Dodge Dana Spicer 60
8 x 6.5" bolt pattern
Yukon Hardcore drive flange kits and hubs provide the ultimate in strength and performance for serious off-road applicationsMore Details »
Item #: WH-D60-C8-YG
Condition:
New
Price: $225.00
40020735, YA C5086666AB, ya, AX:AAM9.25-FAA-LONG, aam, aam 9.25, axle, shaft, axle shaft
Description: 45.5" long
Fits 2003-2008 Chrysler 9.25" front
Right hand side assembly
1485 U-Joint
Item #: AAM9.25-FAA-LONG-01
Condition:
New
Price: $300.00
Description: GM7.5, GM7.6, GM7.6IRS, GM8.0, GM8.25IFS GM8.5, GM8.6, GM8.6IRS Ring Gear Bolt
* 7/16 'S LEFT HAND THREAD
REF PART #'S
* 12479028 / 1303-A / 14066913 / YSPBLT-019
Item #: RGB-019
Condition:
New
Price: $1.50
Description: T7.5, T7.5CS, T8, TV6, ELOCK Ring Gear Bolt
11mm x 1.0
Ref 90101-11353 / YSPBLT-031
Item #: RGB-031
Condition:
New
Price: $1.50
Rear end tools, rearend tools, axle tools, ring and pinion tools,TOOL-BS/RD-KIT,USGD1,SEAL & RACE DRIVER SET
Description: This is a great affordable seal and race driver set. If you don't want to spend 100's of dollars on drivers this is a perfect set. We have had our set in service for 3 years now and is still...More Details »
Item #: TOOL-BS/RD-KIT
Condition:
New
Price: $50.00
A20,SET 20,FORD 9 INCH,BEARING,WHEEL BEARING TAPERED TIMKEN,abkr,abkr-,abkr-set20,ak set20,
Description: TIMKEN FORD 9 INCH / DANA 60 SEMIFLOAT. Rear axle Bearing kit. Includes Tapered Bearing, Race, Seal, and retainer.
OD: 3.150"
ID: 1.562"
mfg. # SET20, A20,
Race: U365L
Bearing: U399A
Item #: ABKR-SET20-F9
Condition:
New
Price: $55.00
dana 35 rear axle parts,bearings,rebuild kit,SET 9,abkr,abkr-,abkr-set9,ak set9,dana,35
Description: Dana 35 - Rear Axle Bearing and Seal Kit - 1 Side SET 9
Bolt in axle non C-clip Dana 35 axle bearing
Item #: ABKR-SET9
Condition:
New
Price: $42.00
dana,60,boring,tool,spindle,35,spline,shafts,ec-bt60
Description: Dana 60 Spindle boring tool- Allows you to accurately and easily bore your Dana 60 rear axle spindles to accept 35 spline shafts. Spindle is bored to 1.560". Tool threads on to spindle to center...More Details »
Item #: TOOL-SPIN-BORING-1
Condition:
New
Price: $500.00
sprinter, mik, dodge, freightliner, mercedes, master install kit, install, kit, bearings, rebuild
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: SPRINTER-MIK
Condition:
New
Price: $330.00
sprinter, mik, dodge, freightliner, mercedes, master install kit, install, kit, bearings, rebuild, DRK-307AMK
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: SPRINTER-MIK-B
Condition:
New
Price: $385.00
SK SSM35, SKCSS-D35, SKCSS, SKCSS-, D35, FORD, STERLING
Description:
"Super" carrier shim kit for Dana 35
Interlocking design makes installation much easier
Item #: SKCSS-D35/D30JK
Condition:
New
Price: $20.00
SK SSF10.25, SKCSS-F10.25, SKCSS, SKCSS-, F10.25, F10.5, FORD, STERLING
Description:
"Super" carrier shim kit for Ford 10.25" and 10.5"
Interlocking design makes installation much easier
Item #: SKCSS-F10.25
Condition:
New
Price: $35.00
SKCSS-SS10,SK SS10, SKCSS, F7.5", GM 7.5", GM 8.2", GM 8.5"
Description: This is a full set up kit to do the job right. It includes:
"Super" carrier shim kit for Ford 7.5", GM 7.5", 7.625", 7.6" IFS, 7.6" IRS, 7.75", 8.2", 8.2" Buick, Oldsmobile and Pontiac and GM...More Details »
Item #: SKCSS-SS10
Condition:
New
Price: $15.00
SKCSS-SS12, SK SS12, SCKSS, F8.8, GM12P, GM12T, GM8.0, GM8.6, GM8.6IRS
Description:
"Super" carrier shim kit for Ford 8.8", GM 12 bolt passenger car and truck, GM 8.0", 8.6", 8.6" IRS and 1963-1979 Corvette
Interlocking design makes installation much easier
More Details »
Item #: SKCSS-SS12
Condition:
New
Price: $15.00