GM 10 BOLT REID RACING KNUCKLE - RIGHT

Only available as a right, passenger-side knuckle

Identical to our regular Chevy Dana 44 & 10-BOLT passenger-side knuckles, but without orange powdercoating

Ideal for crossover steering applications where the OEM non-powdercoated driver’s-side knuckle is retained

* Only available for the passenger side
* Chevy/Jeep spindle bolt pattern accepts “outers” from all open knuckle Chevy half-ton and 3/4-ton front ends
* Cast from high strength ductile iron
* Machined with a “bottom up” taper to match OEM Chevy 10-Bolt tie rod location
* Beefed up with extra material and ribbing
* Flat tops machined and drilled for high steer arms
* 4th bolt hole for high steer arms increases clamping force and sheer strength
* 3/8? thickness added to flat top of the knuckle for high steer tie rod to leaf spring clearance
* Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint and axle failures
* Tapered tie rod holes accept factory tie rod ends
* Tie rod holes can be drilled to accept 3/4? heim ends
* Interchangeable with all factory and aftermarket Dana 44 and 10-Bolt components
* Fully machined and ready for installation
* Machined to clear CTM u-joints without removing the grease fittings