East Coast Gear Supply - STEERING KITS AND PARTS

STEERING KITS AND PARTS
Hi Steer kits and parts for Toyota, Dana 44 and Dana 60 axles

Select a Sub-Category

View  
STEERING KITS AND PARTS - Dana 44 Steering
Steering solutions for Dana 44 front axles
STEERING KITS AND PARTS - Dana 60 Steering
Steering solutions for Dana 60 front axles
STEERING KITS AND PARTS - Tie Rod Ends / Parts
STEERING KITS AND PARTS - Toyota Steering
Toyota Hi-Steer, Hydro assist, pitman arms etc

STEERING KITS AND PARTS Featured Products

Sort
View
 
Items 1-26 of 26
heavy duty steering kit,1.5 250 wall,.25 wall,chevy tie rod ends,tube inserts,crossover,steering kit,HS-HD-KIT,HS-HD,
Description: 1 TON HD STEERING KITS FULL CROSSOVER OR Y-LINK --------------------------------- Kit Includes: 2- Left hand 1 Ton Tie Rod ends (ES2234L) or 1 (ES2233L) For Y-link Kit is Substituted...More Details »
Item #: HS-HD-KIT
Condition: New
Price: $225.00

lh,jam,nut,7/8,18,tpi,chevy,1,ton,rod,end,JAM NUT LH
Description: 7/8"x18TPI LH Jam Nut for use with 7/8"x18TPI "1-ton" tie rod ends and heims. This is the left hand version aka reverse thread (turn to the left to tighten). LH nuts and insterts are marked with a groove
Item #: JAM NUT LH
Condition: New
Price: $4.00
Qty:

TUBE, INSERT, TUBE INSET, TI, BUNG, WELD, WELD IN, STEERING, HEIM,TUBE INSERT LH,1321-11003
Description: Weld in thead insert. Fits 1" ID tubing, left hand thread. Threads stop before end of insert to help reduce thread distortion when plug welding (recomended).
Item #: TUBE INSERT LH
Condition: New
Price: $10.00
Qty:

jam,nut,chevy,1,ton,rod,end,tie,JAM NUT RH
Description: 7/8"x18TPI RH Jam Nut for use with 7/8"x18TPI "1-ton" tie rod ends and heims
Item #: JAM NUT RH
Condition: New
Price: $4.00
Qty:

TUBE, INSERT, TUBE INSET, TI, BUNG, WELD, WELD IN, STEERING, HEIM,TUBE INSERT RH,1321-11004
Description: Weld in thread insert. Fits 1" ID tubing, right hand thread. threads stop before end of instert to help reduce thread distortion when plug welding (recomended)
Item #: TUBE INSERT RH
Condition: New
Price: $10.00
Qty:

REID-D30/D44JK-L,REID-D30/D44JK,REID-D30/D44,REID-D30,REID,JK001L,Dana 30/44 JK REID Knuckle - Left JK001L
Description: The new Jeep Wrangler JK Dana 30/Rubicon 44 knuckles are heavy duty stock replacement knuckles. Raised steering linkage, dual steering stops, and increased strength are the primary improvements...More Details »
Item #: REID-D30/D44JK-L
Condition: New
Price: $279.00

REID-D30/D44JK-R,REID-D30/D44JK,REID-D30/D44,REID-D30,REID,JK001R,Dana 30/44 JK REID Knuckle - Left JK001R
Description: The new Jeep Wrangler JK Dana 30/Rubicon 44 knuckles are heavy duty stock replacement knuckles. Raised steering linkage, dual steering stops, and increased strength are the primary improvements...More Details »
Item #: REID-D30/D44JK-R
Condition: New
Price: $279.00

DS 36326-2: Dana 44 Spindle Stud and Nut Kit - 3/8-20 - Sold as each Stud/Nut - Ref YPSTUD-002,d44-spindle-stud-3/8
Description: Dana 44 Spindle Stud and Nut Kit - 3/8-20 - Sold as each Stud and Nut
Item #: D44-SPINDLE-STUD-3/8
Condition: New
Price: $2.00
Qty:

DANA 60 REID KNUCKLES CHEVY HIGHSTEER HEAVY DUTY COMPETITION,REID-D60-KNKL-CHEV-L,D60001CL
Description: •The strongest Dana 60 knuckles on the market •Cast from high strength ductile iron •Beefed up with extra material and ribbing •100% interchangeable with a Chevy kingpin knuckle...More Details »
Item #: REID-D60-KNKL-CHEV-L
Condition: New
Price: $299.00
Qty:

DANA 60 REID KNUCKLES CHEVY HIGHSTEER HEAVY DUTY COMPETITION,REID-D60-KNKL-CHEV-R,D60001CR
Description: •The strongest Dana 60 knuckles on the market •Cast from high strength ductile iron •Beefed up with extra material and ribbing •100% interchangeable with a Chevy kingpin knuckle...More Details »
Item #: REID-D60-KNKL-CHEV-R
Condition: New
Price: $299.00
Qty:

FORD DANA 60 KNUCKLES HEAVY DUTY HIGHSTEER BROKEN KNUCKLE REID DEDENBEAR CRANE SOLID,REID-D60-KNKL-FORD-L,D60001FL
Description: •The strongest Dana 60 knuckles on the market •Cast from high strength ductile iron •Beefed up with extra material and ribbing •100% interchangeable with a Chevy kingpin knuckle...More Details »
Item #: REID-D60-KNKL-FORD-L
Condition: New
Price: $329.00

FORD DANA 60 KNUCKLES HEAVY DUTY HIGHSTEER BROKEN KNUCKLE REID DEDENBEAR CRANE SOLID,REID-D60-KNKL-FORD-R,D60001FR
Description: •The strongest Dana 60 knuckles on the market •Cast from high strength ductile iron •Beefed up with extra material and ribbing •100% interchangeable with a Chevy kingpin knuckle...More Details »
Item #: REID-D60-KNKL-FORD-R
Condition: New
Price: $329.00

ES2027L CHEVY 1 TON TIE ROD END,TROD-1TON-LHA,ES2027L,ES2027L CHEVY 1 TON TIE ROD END - HIGH ANGLE
Description: ES2027L CHEVY 1 TON TIE ROD END, LEFT HAND HIGH ANGLE 60 DEGREE
Item #: TROD-1TON-LHA
Condition: New
Price: $25.00

es2233l,rod,end,1,ton,tre,hd,off,road,steering,tie,rod,TROD-1TON-SPLIT,ES2233L,
Description: ES2233L left hand thread tie rod end. This rod end has a hole reamed from back to front (when being used on the passenger side knuckle) for a steering stabilizer bolt. Rod end can be reamed from...More Details »
Item #: TROD-1TON-SPLIT
Condition: New
Price: $25.00

TROD-1TON-L,ES2234L Tie Rod End,ES2234L
Description: Popular 7/8"x18TPI left hand thread "1-ton" tie rod end. Used by thousands of off road trucks for HD steering upgrade. Tapered with the standard 1.5" per foot. Tube insert and jam nut can be added below
Item #: TROD-1TON-L
Condition: New
Price: $22.00

steering, hd, 1 ton, heavy duty, EX2234R,TROD-1TON-R,Tie Rod end
Description: Popular 7/8"x18TPI right hand thread "1-ton" tie rod end. Used by thousands of off road trucks for HD steering upgrade. Tapered with the standard 1.5" per foot GM Taper. Tube insert and jam nut can be added below.
Item #: TROD-1TON-R
Condition: New
Price: $22.00

steering, hd, 1 ton, heavy duty, EX23434,TROD-1TON-OFFSET-L,EX23434 LH Tie Rod End
Description: Popular 7/8"x18TPI offset left hand thread "1-ton" tie rod end. Used by thousands of off road trucks for HD steering upgrade. Tapered with the standard 1.5" per foot GM Taper. Tube insert and jam nut can be added below.
Item #: TROD-1TON-OFFSET-L
Condition: New
Price: $35.00

steering, hd, 1 ton, heavy duty, EX23434 RH,TROD-1TON-OFFSET-R,EX23434 RH Tie Rod End
Description: Popular 7/8"x18TPI offset right hand thread "1-ton" tie rod end. Used by thousands of off road trucks for HD steering upgrade. Tapered with the standard 1.5" per foot GM Taper. Tube insert and jam nut can be added below.
Item #: TROD-1TON-OFFSET-R
Condition: New
Price: $35.00

68004086AA, 68004087AA, jk, steering, knuckle, jeep, jeep jk,
Description: New JK Steering knuckles, these are factory replacement knuckles. Fits Dana 30 & 44 on 2007 & Newer Jeep JK. Select Left or Right below.
Item #: JK-KNUCKLE
Condition: New
Price: $100.00

Description: These inserts are perfect for converting over to 1-ton GM tie rod ends, or if you want to change from heims to tie rod ends. All you need is a 7/8 drill bit and you can use these inserts for over...More Details »
Item #: TROD-INSERT
Condition: New
Price: $9.00
Qty:

D30001JL,reid,jeep,reid racing,knuckle,REID-D30/D44-KNKL-L
Description: The new Dana 30 / Rubicon 44 knuckle will transform late model Jeep axles into true contenders. The Reid Racing conversion knuckles are the cheapest and strongest way to adapt these axles to use...More Details »
Item #: REID-D30/D44-KNKL-L
Condition: New
Price: $279.00

D30001JR,reid,jeep,reid racing,knuckle,REID-D30/D44-KNKL-R
Description: The new Dana 30 / Rubicon 44 knuckle will transform late model Jeep axles into true contenders. The Reid Racing conversion knuckles are the cheapest and strongest way to adapt these axles to use...More Details »
Item #: REID-D30/D44-KNKL-R
Condition: New
Price: $279.00

reamer. tie rod, rod, tie, one, ton, one-ton,TOOL-REAMER-7/8,R121,One Ton Tie Rod Reamer 7/8
Description: This reamer is meant to ream out knuckles to accept standard one ton tie rod ends. Made out of high quality materials to resist dulling.
Item #: TOOL-REAMER-7/8
Condition: New
Price: $90.00
Qty:

Description: Features • Forged from alloy steel. • Available in 3.00 inch bore sizes, but can be bored larger. • Based off the Dana 70 Inner knuckle. • Designed to work with all kingpin inner knuckles.
Item #: SA-D60-INNERC-KP
Condition: New
Price: $430.00
Qty:

Description: Features • Cast from high strength nodular iron. • Designed with increased webbing and material thicknesses in critical areas. • 6 tapped holes and machined key for high shear loads. •...More Details »
Item #: SA-D60-KNUCKLES-KP
Condition: New
Price: $440.00
Qty:

HS3001,REID,ARTEC,CONVERSION,ARM,HIGH,STEER,HIGH STEER,HIGH STEER ARM,HSA-TJ-REID,HS3001
Description: Designed to be used with Dana 30/Rubicon 44 Conversion Knuckles, these high steer arms will get your tie rod up out of the way from all obstacles. They are designed to be used with 3/4" Rod Ends...More Details »
Item #: HSA-TJ-REID
Condition: New
Price: $189.99
Qty:

Items 1-26 of 26