East Coast Gear Supply » ECGS

ECGS

Browse STEERING KITS AND PARTS Products

Sort
View
 
Items 1-40 of 40
heavy duty steering kit,1.5 250 wall,.25 wall,chevy tie rod ends,tube inserts,crossover,steering kit,HS-HD-KIT,HS-HD,
Description: 1 TON HD STEERING KITS FULL CROSSOVER OR Y-LINK --------------------------------- Kit Includes: 2- Left hand 1 Ton Tie Rod ends (ES2234L) or 1 (ES2233L) For Y-link Kit is Substituted...More Details »
Item #: HS-HD-KIT
Condition: New
Price: $350.00

lh,jam,nut,7/8,18,tpi,chevy,1,ton,rod,end,JAM NUT LH
Description: 7/8"x18TPI LH Jam Nut for use with 7/8"x18TPI "1-ton" tie rod ends and heims. This is the left hand version aka reverse thread (turn to the left to tighten). LH nuts and insterts are marked with a groove
Item #: JAM NUT LH
Condition: New
Price: $4.00
Qty:

TUBE, INSERT, TUBE INSET, TI, BUNG, WELD, WELD IN, STEERING, HEIM,TUBE INSERT LH,1321-11003
Description: Weld in thead insert. Fits 1" ID tubing, left hand thread. Threads stop before end of insert to help reduce thread distortion when plug welding (recommended).
Item #: TUBE INSERT LH
Condition: New
Price: $10.00
Qty:

jam,nut,chevy,1,ton,rod,end,tie,JAM NUT RH
Description: 7/8"x18TPI RH Jam Nut for use with 7/8"x18TPI "1-ton" tie rod ends and heims
Item #: JAM NUT RH
Condition: New
Price: $4.00
Qty:

TUBE, INSERT, TUBE INSET, TI, BUNG, WELD, WELD IN, STEERING, HEIM,TUBE INSERT RH,1321-11004
Description: Weld in thread insert. Fits 1" ID tubing, right hand thread. threads stop before end of instert to help reduce thread distortion when plug welding (recommended)
Item #: TUBE INSERT RH
Condition: New
Price: $10.00
Qty:

Description: Steering Knuckle - heavy duty replacement - mill, drilled and tap for 9/16 x 18 tpi, stock stud.
Item #: KND44C1-LH/KND44C1-RH
Condition: New
Please Call for Availability
Call For Price: 919-672-2705
DS 36326-2: Dana 44 Spindle Stud and Nut Kit - 3/8-24 - Sold as each Stud/Nut - Ref YPSTUD-002,d44-spindle-stud-3/8
Description: Dana 44 Spindle Stud and Nut Kit - 3/8-24 - Sold as each Stud and Nut
Item #: D44-SPINDLE-STUD-3/8
Condition: New
Price: $2.00
Qty:

ES2027L CHEVY 1 TON TIE ROD END,TROD-1TON-LHA,ES2027L,ES2027L CHEVY 1 TON TIE ROD END - HIGH ANGLE
Description: ES2027L CHEVY 1 TON TIE ROD END, LEFT HAND HIGH ANGLE 60 DEGREE
Item #: TROD-1TON-LHA
Condition: New
Price: $25.00

es2233l,rod,end,1,ton,tre,hd,off,road,steering,tie,rod,TROD-1TON-SPLIT,ES2233L,
Description: ES2233L left hand thread tie rod end. This rod end has a hole reamed from back to front (when being used on the passenger side knuckle) for a steering stabilizer bolt. Rod end can be reamed from...More Details »
Item #: TROD-1TON-SPLIT
Condition: New
Price: $25.00

TROD-1TON-L,ES2234L Tie Rod End,ES2234L
Description: Popular 7/8"x18TPI left hand thread "1-ton" tie rod end. Comes with jam nut. Used by thousands of off road trucks for HD steering upgrade. Tapered with the standard 1.5" per foot. Tube insert can be added below
Item #: TROD-1TON-L
Condition: New
Price: $35.00

steering, hd, 1 ton, heavy duty, EX23434,TROD-1TON-OFFSET-L,EX23434 LH Tie Rod End, ES2234L OS
Description: Popular 7/8"x18TPI offset left hand thread "1-ton" tie rod end. Used by thousands of off road trucks for HD steering upgrade. Tapered with the standard 1.5" per foot GM Taper. Tube insert and jam nut can be added below.
Item #: TROD-1TON-OFFSET-L
Condition: New
Price: $35.00

steering, hd, 1 ton, heavy duty, EX2234R,TROD-1TON-R,Tie Rod end
Description: Popular 7/8"x18TPI right hand thread "1-ton" tie rod end. Comes with jam nut. Used by thousands of off road trucks for HD steering upgrade. Tapered with the standard 1.5" per foot GM Taper. Tube insert can be added below.
Item #: TROD-1TON-R
Condition: New
Price: $35.00

steering, hd, 1 ton, heavy duty, EX23434 RH,TROD-1TON-OFFSET-R,EX23434 RH Tie Rod End, ES2234L OS
Description: Popular 7/8"x18TPI offset right hand thread "1-ton" tie rod end. Used by thousands of off road trucks for HD steering upgrade. Tapered with the standard 1.5" per foot GM Taper. Tube insert and jam nut can be added below.
Item #: TROD-1TON-OFFSET-R
Condition: New
Price: $35.00

Description: These inserts are perfect for converting over to 1-ton GM tie rod ends, or if you want to change from heims to tie rod ends. All you need is a 7/8 drill bit and you can use these inserts for over...More Details »
Item #: TROD-INSERT
Condition: New
Price: $9.00
Qty:

reamer. tie rod, rod, tie, one, ton, one-ton,TOOL-REAMER-7/8,R121,One Ton Tie Rod Reamer 7/8
Description: This reamer is meant to ream out knuckles to accept standard one ton tie rod ends. Made out of high quality materials to resist dulling.
Item #: TOOL-REAMER-7/8
Condition: New
Price: $100.00
Qty:

heavy duty steering kit,1.5 250 wall,.25 wall,chevy tie rod ends,tube inserts,crossover,steering kit,HS-HD-KIT,HS-HD,
Description: 1 TON HD STEERING KITS FULL CROSSOVER OR Y-LINK --------------------------------- Kit Includes: 2- Left hand 1 Ton Tie Rod ends (ES2234L) or 1 (ES2233L) For Y-link Kit is Substituted...More Details »
Item #: HS-HD-KIT
Condition: New
Price: $350.00

lh,jam,nut,7/8,18,tpi,chevy,1,ton,rod,end,JAM NUT LH
Description: 7/8"x18TPI LH Jam Nut for use with 7/8"x18TPI "1-ton" tie rod ends and heims. This is the left hand version aka reverse thread (turn to the left to tighten). LH nuts and insterts are marked with a groove
Item #: JAM NUT LH
Condition: New
Price: $4.00
Qty:

TUBE, INSERT, TUBE INSET, TI, BUNG, WELD, WELD IN, STEERING, HEIM,TUBE INSERT LH,1321-11003
Description: Weld in thead insert. Fits 1" ID tubing, left hand thread. Threads stop before end of insert to help reduce thread distortion when plug welding (recommended).
Item #: TUBE INSERT LH
Condition: New
Price: $10.00
Qty:

jam,nut,chevy,1,ton,rod,end,tie,JAM NUT RH
Description: 7/8"x18TPI RH Jam Nut for use with 7/8"x18TPI "1-ton" tie rod ends and heims
Item #: JAM NUT RH
Condition: New
Price: $4.00
Qty:

TUBE, INSERT, TUBE INSET, TI, BUNG, WELD, WELD IN, STEERING, HEIM,TUBE INSERT RH,1321-11004
Description: Weld in thread insert. Fits 1" ID tubing, right hand thread. threads stop before end of instert to help reduce thread distortion when plug welding (recommended)
Item #: TUBE INSERT RH
Condition: New
Price: $10.00
Qty:

Description: D44 High Steer Conical Washers - 3 required per arm, 4 per Reid arm - Sold as each
Item #: HSAH-D44CONE
Condition: New
Price: $4.25
Qty:

flat,top,knuckles,d44,dana,44,HS-D44-KNUCKLES,HS-D44,HS,D44,KNUCKLES
Description: Left and Right armless knuckles, milled, drilled and tapped for high steer arms. Please note these are for 6 bolt spindles!!
Item #: HS-D44-KNUCKLES
Condition: New
Price: $399.00
Qty:

Description: Steering Knuckle - heavy duty replacement - mill, drilled and tap for 9/16 x 18 tpi, stock stud.
Item #: KND44C1-LH/KND44C1-RH
Condition: New
Please Call for Availability
Call For Price: 919-672-2705
d44,dana,44,hi,steer,HSAK-D44HK,HSAK,D44HK
Description: Kit Includes: 9/16 โ€“ 18 x 3 Stud 9/16 โ€“ 18 Top Lock 9/16 Conical Washer
Item #: HSAK-D44HK
Condition: New
Price: $7.00
Qty:

d44,dana,44,hi,steer,HSAK-D442,HSAK,D442
Description: Kit Includes: Left and Right High Steer Arms (Black Oxide) 5.5 / 7.625 From Center 6 - Conical Washers 6 - 9/16's Studs 6 - Lock Nuts
Item #: HSAK-D442
Condition: New
Price: $209.00

d44,dana,44,hi,steer,HSAK-D441,HSAK,D441,
Description: Kit Includes: Left and Right High Steer Arms 5.5 / 7.625 From Center 6 - Conical Washers 6 - 9/16's Studs 6 - Lock Nuts
Item #: HSAK-D441
Condition: New
Price: $209.00

DS 36326-2: Dana 44 Spindle Stud and Nut Kit - 3/8-24 - Sold as each Stud/Nut - Ref YPSTUD-002,d44-spindle-stud-3/8
Description: Dana 44 Spindle Stud and Nut Kit - 3/8-24 - Sold as each Stud and Nut
Item #: D44-SPINDLE-STUD-3/8
Condition: New
Price: $2.00
Qty:

dana,60,arp,studs,high,steer,HSA-D60-HW-ARP-KIT,HSA-D60-HW-ARP,HSA-D60-HW,HSA-D60,HSA,D60
Description: ARP DANA 60 STUDS : EACH STUD COMES WITH CONICAL NUT. SOLD INDIVIDUALLY AS ONE STUD AND NUT. These are the strongest studs available on the market: 220,000 PSI tensile strength
Item #: HSA-D60-HW-ARP-KIT
Condition: New
Price: $22.75
Qty:

d60,dana,60,hi,steer,arm,kit,off,road,HSAK-D602,HSAK,D602
Description: Dana 60 high steer arm kit. Includes: Left and Right Springless Arms 2 Hole GM 1-TON TAPER 5-1/4 & 7-3/8 HOLES 2 Set Screws 2 Jam Nuts 2 Preload Plates 2 Zerk Fitting 8 Studs...More Details »
Item #: HSAK-D602
Condition: New
Price: $230.00

dana,60,arp,studs,high,steer,HSA-D60-HW-ARP-KIT,HSA-D60-HW-ARP,HSA-D60-HW,HSA-D60,HSA,D60
Description: DANA 60 STUDS : EACH STUD COMES WITH CONICAL NUT. SOLD INDIVIDUALLY AS ONE STUD AND NUT. 180,000 PSI tensile strength
Item #: HSAH-D60STUD/NUT
Condition: New
Price: $5.00
Qty:

dana,60,d60,front,axle,king,pin,rebuild,kit,d60-kp-rebuild,d60,ds 706395-r
Description: Dana 60 Kingpin knuckle rebuild kit. Includes: *1 lower bearing set (Timken) *1 lower seal *1 upper seal *1 lower retaining plate *1 king pin *1 nylon bushing *1 spring, 1 washer *1 steel...More Details »
Item #: D60-KP-REBUILD
Condition: New
Price: $110.00

dana,60,arp,studs,hi,steerHS-D60-ARP-STUDS,HS-D60-ARP,HS-D60,HS,D60,ARP,STUDS
Description: Set of 8 ARP studs and nuts to attach high steer arms to kingpin Dana 60 knuckles. One kit does both left and right knuckles.
Item #: HSA-D60-HW-ARP-KIT
Condition: New
Price: $176.00
Qty:

ES2027L CHEVY 1 TON TIE ROD END,TROD-1TON-LHA,ES2027L,ES2027L CHEVY 1 TON TIE ROD END - HIGH ANGLE
Description: ES2027L CHEVY 1 TON TIE ROD END, LEFT HAND HIGH ANGLE 60 DEGREE
Item #: TROD-1TON-LHA
Condition: New
Price: $25.00

es2233l,rod,end,1,ton,tre,hd,off,road,steering,tie,rod,TROD-1TON-SPLIT,ES2233L,
Description: ES2233L left hand thread tie rod end. This rod end has a hole reamed from back to front (when being used on the passenger side knuckle) for a steering stabilizer bolt. Rod end can be reamed from...More Details »
Item #: TROD-1TON-SPLIT
Condition: New
Price: $25.00

TROD-1TON-L,ES2234L Tie Rod End,ES2234L
Description: Popular 7/8"x18TPI left hand thread "1-ton" tie rod end. Comes with jam nut. Used by thousands of off road trucks for HD steering upgrade. Tapered with the standard 1.5" per foot. Tube insert can be added below
Item #: TROD-1TON-L
Condition: New
Price: $35.00

steering, hd, 1 ton, heavy duty, EX23434,TROD-1TON-OFFSET-L,EX23434 LH Tie Rod End, ES2234L OS
Description: Popular 7/8"x18TPI offset left hand thread "1-ton" tie rod end. Used by thousands of off road trucks for HD steering upgrade. Tapered with the standard 1.5" per foot GM Taper. Tube insert and jam nut can be added below.
Item #: TROD-1TON-OFFSET-L
Condition: New
Price: $35.00

steering, hd, 1 ton, heavy duty, EX2234R,TROD-1TON-R,Tie Rod end
Description: Popular 7/8"x18TPI right hand thread "1-ton" tie rod end. Comes with jam nut. Used by thousands of off road trucks for HD steering upgrade. Tapered with the standard 1.5" per foot GM Taper. Tube insert can be added below.
Item #: TROD-1TON-R
Condition: New
Price: $35.00

steering, hd, 1 ton, heavy duty, EX23434 RH,TROD-1TON-OFFSET-R,EX23434 RH Tie Rod End, ES2234L OS
Description: Popular 7/8"x18TPI offset right hand thread "1-ton" tie rod end. Used by thousands of off road trucks for HD steering upgrade. Tapered with the standard 1.5" per foot GM Taper. Tube insert and jam nut can be added below.
Item #: TROD-1TON-OFFSET-R
Condition: New
Price: $35.00

Description: These inserts are perfect for converting over to 1-ton GM tie rod ends, or if you want to change from heims to tie rod ends. All you need is a 7/8 drill bit and you can use these inserts for over...More Details »
Item #: TROD-INSERT
Condition: New
Price: $9.00
Qty:

reamer. tie rod, rod, tie, one, ton, one-ton,TOOL-REAMER-7/8,R121,One Ton Tie Rod Reamer 7/8
Description: This reamer is meant to ream out knuckles to accept standard one ton tie rod ends. Made out of high quality materials to resist dulling.
Item #: TOOL-REAMER-7/8
Condition: New
Price: $100.00
Qty:

Items 1-40 of 40