- Home »
- Catalog »
- GEARS, INSTALL KITS, CARRIERS, SPIDER GEARS »
- DANA SPICER GEARS »
- Dana 60 (D60)
East Coast Gear Supply » ECGS
Browse Dana 60 (D60) Products
dana,60,spider,gears,spider,gear,kit,32,spline, d60-, d60, d60-ipk, d60-ipk-s, d60-ipk-s-32, dana, spicer, dana spicer
Description: This kit includes spider gears, side gears,thrust washers, cross pin, and cross pin retainer. Spider gear kit fits Dana 60 one piece open carrier only! Does not fit 2 piece case or limited slip...More Details »
Item #: D60-IPK-32
Condition:
New
Price: $105.00
dana,60,spider,gears,spider,gear,kit,35,spline, d60-, d60, d60-ipk, d60-ipk-s, d60-ipk-s-35, dana, spicer, dana spicer
Description: This kit includes spider gears, 35 spline side gears,thrust washers, cross pin, and cross pin retainer. Spider gear kit fits Dana 60 one piece open carrier only! Does not fit 2 piece case or...More Details »
Item #: D60-IPK-35
Condition:
New
Price: $105.00
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-gm/d,d60-spindle,d60,spindle,gm reid solid crane spindle,700013
Description: DANA SPICER REFERENCE PART # 700013
Manufactured by ECGS
Fits Chevy, Dodge, and GM Dana 60 Spindle:
* 7.5" Long
* 7" Flange
* 6 HOLES
* Bearing Journals 2.020" X 2.255"
* Spindle...More Details »
Item #: D60-SPINDLE-GM/D
Condition:
New
Price: $120.00
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-f-l,d60-spindle,d60,spindle,gm reid solid crane spindle,708085
Description: DANA SPICER REFERENCE PART # 708085
Manufactured by ECGS
Fits Ford 1993 -1998 Dana 60 Spindle, check flange width Pre 92 spindle has 6.5" flange and was used in later applications also:
* 7"...More Details »
Item #: D60-SPINDLE-FORD-L
Condition:
New
Price: $140.00
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-f-e,d60-spindle,d60,spindle,gm reid solid crane spindle,700022
Description: DANA SPICER REFERENCE PART # 700022
Manufactured by ECGS
Fits all Ford 92 and Earlier Dana 60 Spindle and some later check flange width late spindle has 7" Flange:
* 7" Long
* 6.5" Flange...More Details »
Item #: D60-SPINDLE-FORD-E
Condition:
New
Price: $140.00
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-brg,d60-spindle,d60,spindE, SBK-5, YSPSP-024-V2
Description: DANA SPICER PART # 700014 Dana 60 Spindle Bearing and Seal Kit
Includes: Bearing, two Seals and Thrust Washer.
Three Seal: Factory Style Kit. Includes: Bearing, Two Seals and Thrust...More Details »
Item #: D60-SPINDLE-BRG-2
Condition:
New
Price: $30.50
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-brg,d60-spindle,d60,spindle,700014
Description: DANA SPICER PART # 700014 Dana 60 Spindle Bearing and Seal Kit
Includes: Bearing, two Seals and Thrust Washer.
Three Seal: Factory Style Kit. Includes: Bearing, Two Seals and Thrust...More Details »
Item #: D60-SPINDLE-BRG
Condition:
New
Price: $28.50
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-bush,d60-spindle,d60,spindle,bushing
Description: Tired of your needle bearings failing and damaging your spindle or stub shaft? These bushings the bearing, comes with a new thrust washer and spindle seal. Works with 30 spline and 35 spline stubs....More Details »
Item #: D60-SPINDLE-BUSH-EC
Condition:
New
Price: $26.00
locker,spool,traction,DANA 60,FULL SPOOL 30 SPLINE,d60-spool-3-30,d60-spool,d60-spool,3,yp,fsd60-3-30
Description: * Fits Dana Spicer 60 with 30 spline axles
* 4.10 and down ratio only
* Provides 100% traction to both wheels at all times
* Not recommended for street driven vehicles
Item #: D60-SPOOL-3-30
Condition:
New
Price: $318.60
Sale: $275.00
Save: 14%
Save: $43.60
locker,spool,traction,DANA 60,FULL SPOOL 35 SPLINE,d60-spool-3-35,d60-spool,d60-spool,3,yp,fsd60-3-35
Description: * Fits Dana Spicer 60 with 35 spline axles
* 4.10 and down ratio only
* Provides 100% traction to both wheels at all times
* Not recommended for street driven vehicles
Item #: D60-SPOOL-3-35
Condition:
New
Price: $165.00
locker,spool,traction,DANA 60,FULL SPOOL 30 SPLINE,d60-spool-4-30,d60-spool,d60-spool,4,yp,fsd60-4-30
Description: If you need complete traction and the lowest price with out sacrificing strength.
Item #: D60-SPOOL-4-30
Condition:
New
Price: $220.00
locker,spool,traction,DANA 60,FULL SPOOL 35 SPLINE,d60-spool-4-35,d60-spool,d60-spool,4,yp,fs-d60-4-35
Description: If you need complete traction and the lowest price with out sacrificing strength.
Item #: D60-SPOOL-4-35
Condition:
New
Price: $145.00
locker,spool,traction,DANA 60,FULL SPOOL 35 SPLINE,d60-spool-4-40,d60-spool,d60-spool,4,yp,fs-d60-4-40
Description: * Fits Dana Spicer 60 with 40 spline axles
* 4.56 and up ratio only
* Provides 100% traction to both wheels at all times
* Not recommended for street driven vehicles
Item #: D60-SPOOL-4-40
Condition:
New
Price: $275.00
asi-d60, dana 60 axle seal, inner axle seal, d60, DS 52148 / YMSS1018 / 2C3Z-3254-AA, super duty, ford
Description: Dana 50 and Dana 60 Super Duty inner axle seal - Straight Axle - Super Duty Only - Ref DS 52148 / YMSS1018 / 2C3Z-3254-AA
Item #: ASI-D60-SD
Condition:
New
Price: $18.00
Dana 60 rear drive flanges, double splined shafts, 4340 chromoly,dfr,
Description: These are rear bolt on flanges that allow you to run double spline shafts in your Dana 60, Dana 70, or Dana 80. We have american made 4340 and 300m shafts available, to give you the ultimate...More Details »
Item #: DFR-
Condition:
New
Price: $325.00
axle protection armor rearend diff guards blue torch fab,d60-bsfw,d60
Description: The Differential cover is a 1 piece Plate steel cap 3/8" (.375") bent 8 ways then welded to a 3/8" ring! The fill plug is a generous 1" ID for easy fill and oil level check. The D60 is our best...More Details »
Item #: DCD60-DS-FAB
Condition:
New
Price: $175.00
Description: * Designed and engineered for performance applications
* Manufactured from high-strength, nodular iron
* Built with ribbing to protect differential components from off-road hazards
* Ensures...More Details »
Item #: DCD60-DS-N-DS
Condition:
New
Price: $170.00
ubolt pinion yoke ford chevy cucv dodge,d60-yoke,d60-yoke-1310-29u,yoke,1310,
Description: This is a forged pinion yoke stronger than billet, the u bolt style also gives you the extra strength over straps.
1.062" cap diameter
3.219" snap ring span
Fits Dana Spicer 60, 70, 70U and...More Details »
Item #: YOKE-D60-1310-29U
Condition:
New
Price: $100.00
ubolt pinion yoke ford chevy cucv dodge,d60-yoke,d60-yoke-1330-29s,yoke,1310, 2-4-8051-1X, 2-4-4291-1X
Description: OE Dana Spicer Pinion Yoke
1.062" cap diameter
1330 u-joint size
29 spline
3.625" snap ring span
Fits Dana Spicer 60, 70, 70U and 70HD
Outside snap ring design
Strap style
Item #: YOKE-D60-1330-29S
Condition:
New
Price: $45.00
Sale: $40.00
Save: 11%
Save: $5.00
ubolt pinion yoke ford chevy cucv dodge,d60-yoke,d60-yoke-1350-29u,yoke,1350,
Description: This is a forged pinion yoke stronger than billet, the u bolt style also gives you the extra strength over straps.
1.188? cap diameter
3.625? snap ring span
Fits Dana Spicer 60, 70, 70U and...More Details »
Item #: YOKE-D60-1350-29U
Condition:
New
Price: $100.00
ubolt pinion yoke ford chevy cucv dodge,d60-yoke,d60-yoke-1410-29u,yoke,1410,
Description: This is a factory replacement yoke, the u-bolt style also gives you the extra strength over straps.
1.188? cap diameter
4.188? snap ring span
Fits Dana Spicer 60, 70, 70U and 70HD
1410...More Details »
Item #: YOKE-D60-1410-29U
Condition:
New
Price: $105.00
Description: D60, D70 - Dana 60 & Dana 70 Side Carrier Bearing Spacer .120" - For use with Narrow Cases - Ref DS 47560-292. This is for ONE spacer!!
Item #: SKC-D60-CB-SPACER
Condition:
New
Price: $9.00
Description: Dana 60, Dana 61, Dana 70, Dana 70U & Dana 80 Carrier Shim Kit
Item #: SKC-D60/70/80
Condition:
New
Price: $8.00
dana 60 spindle nut kit,d60-spindle-nut,ak d50f-nuts-a,d60-spindle,d60,spindle,nutd
Description: Dana 60 Spindle Nut Kit:
1 Nut with retainer pin
1 Keyed washer
1 Locking Nut
Item #: D60-SPINDLE-NUT
Condition:
New
Price: $40.00
AK CD60,ABKR-CD60/70,ABKR,DODGE,BEARING,D70,D60,D70U,DANA,SPICER,DANA SPICER,abkr-,abkr,cd60
Description:
Fits 1994-2002 Dodge Dana Spicer 60 and 70U
Includes inner and outer bearings and races and axle seal
Services one side
Item #: ABKR-CD60/70
Condition:
New
Price: $90.00
excalibur 300m u-joint, 300m u-joint, excalibur, dana 60, d60, ford super duty, ford, u-joint, 300m, u-joints, np 806x-300m-kit, np806x-300m-kit, nitro gear & axle, nitro, front axle, axle,, made in usa, lifetime, warranty, rale
Description: The ECGS U-joint cross is made from 4340 and the caps are 4340. The entire u-joint unit is heat treated and cryo'd for ultimate strength and wear resistance. The u-joint comes with full circle...More Details »
Item #: D60-U-JOINT-4340
Condition:
New
Price: $275.00
AK CD60,ABKR-FD60/70,ABKR,FORD,BEARING,D70,D60,D70U,DANA,SPICER,DANA SPICER,abkr-,abkr,abkr-fd60/70,cd60,fd60/70
Description:
Fits 1967-1997 Ford F350 and E350 rear with Dana Spicer 60 or 70
Includes inner and outer bearings and races and axle seal
Services one side
Item #: ABKR-D60/70
Condition:
New
Price: $75.00
Warn Hubs Dana 60 Premium assembly, 62672, dana 60, wheel, hub, wheel hub, chevy, dana,WH-D60-C8-OE,177703
Description: Single Wheel Hub. Comes with:
Wheel Hub
Rotor
Studs
Item #: WH-D60-C8-EC
Condition:
New
Price: $325.00
Free Shipping on Orders $500 or more
Pinion Nut - 010 (PN-010), pinion, pinion nut, pn, Jeep JK, Dana Spicer, 44HD, 60, 70, 70U, 70HD and Nissan Titan rear,PN-010
Description:
Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
7/8" x 14 thread
1 5/16" socket
Item #: PN-010
Condition:
New
Price: $6.50
Description: Fits Ford and Dodge applications
Includes axle bearing and seal
Torrington Brand
Services one side
2.985" O.D.
1.700" I.D.
Item #: ABKR-1561-FD
Condition:
New
Price: $35.00
14 bolt disc conversion brake drum kit pads rotors calipers
Description: This is a complete weld on kit to upgrade your rear drum brakes to disc brakes.
Kit Includes:
Weld On 3.25" Diameter Brackets
Left and Right 1/2 Ton Calipers
New Brake Pads
New...More Details »
Item #: DBK-8LUG-UNIVERSAL
Condition:
New
Price: $410.00