East Coast Gear Supply - Chrysler 8.25

CHRYSLER - Chrysler 8.25
FITS:
Dakota (82-Present)
Liberty (01-Present)
B100, B150, B200, B250 (69-Present)
W100, W150 (86-Present)

Select a Sub-Category

View  
CHRYSLER - Chrysler 8.25 - AXLE SHAFTS/ U-JOINTS
AXLE SHAFTS/ U-JOINTS
CHRYSLER - Chrysler 8.25 - CARRIERS / SPIDER GEARS/ SMALL PARTS
CARRIERS / SPIDER GEARS/ SMALL PARTS
CHRYSLER - Chrysler 8.25 - COVERS / AXLE ARMOR UPGRADE PARTS
COVERS / AXLE ARMOR UPGRADE PARTS
CHRYSLER - Chrysler 8.25 - INSTALL KITS/ BEARINGS/ SEALS/ SHIMS
INSTALL KITS/ BEARINGS/ SEALS/ SHIMS
CHRYSLER - Chrysler 8.25 - LOCKERS, POSI's
LOCKERS, POSI's
CHRYSLER - Chrysler 8.25 - RING AND PINIONS
RING AND PINIONS
CHRYSLER - Chrysler 8.25 - YOKES / DRIVESHAFT PARTS
YOKES / DRIVESHAFT PARTS

Chrysler 8.25 Featured Products

Sort
View
 
Items 1-30 of 30
Dodge chrysler 9.25 rearend rear end axle differential tools,TOOL-C8.25-ADJ,Chrysler Dodge Carrier Bearing Adjuster Tool
Description: This tool fits the carrier bearing adjusters, inside the axle tube, a must have for Dodge, Chrysler 9.25, 8.25 and 7.25 rear ends. The tool measures 3 inches so one has to use an extension to reach...More Details »
Item #: TOOL-C8.25-ADJ
Condition: New
Price: $24.95
Qty:

yoke, c8.25, chrysler, 8.25, c8.25-, yoke-, yoke-c8.25, yoke-c8.25-, yoke-c825, yoke-c8.25-1310, yoke-c8.25-1310-, yoke-c8.25-1310-u, nitro, jeep, xj, cherokee.
Description: Chrysler 8.25" 27 Spline 1310 U-Bolt Yoke (XJ) Forged
Item #: YOKE-C8.25-1310-U
Condition: New
Price: $120.00

CHRYSLER 8.25,LIMITED SLIP,SPIDER GEARS,POSISTRACTION,TRAKLOK,tRACKLOCK,TRAK-LOK,TRAC,LOK,31 SPLINE,BROKEN SPIDER GEARS,CLUTCHES,c8.25-t/l-27,c8.25,75101x
Description: CHRYSLER 8.25 TRAK LOK 27 SPLINE FACTORY POSITRACTION REPLACEMENT UNIT FOR LIMITED SLIP EQUIPPED DIFFERENTIALS. THIS IS AN OE UNIT DANA SPICER 73102 OR 73101.
Item #: C8.25-T/L-27
Condition: New
Price: $325.00
Qty:

CHRYSLER 8.25,LIMITED SLIP,SPIDER GEARS,POSISTRACTION,TRAKLOK,tRACKLOCK,TRAK-LOK,TRAC,LOK,31 SPLINE,BROKEN SPIDER GEARS,CLUTCHES,c8.25-t/l-29,c8.25,84852
Description: CHRYSLER 8.25 TRAK LOK 29 SPLINE FACTORY POSITRACTION REPLACEMENT UNIT FOR LIMITED SLIP EQUIPPED DIFFERENTIALS. THIS IS AN OE UNIT DANA SPICER.
Item #: C8.25-T/L-29
Condition: New
Price: $325.00
Qty:

arb chrysler 8.25" air locker, arb chrysler 8.25", arb, chrysler 8.25" air locker, rd93, arb rd93, chrysler 8.25", chrysler, 8.25", arb air locker, air locker, air, locker, 29 spline, all, gear, ratio, axle, differential, locking, spline, posi-traction, r
Description: Chrysler 8.25" ARB® #RD93 Air Locker Features The ARB Chrysler 8.25" air locker RD93 for your 29 spline axle for all gear ratios, can instantly lock differentials and allow you to tackle the...More Details »
Item #: ARB-RD93
Condition: New
Price: $940.50

c8.25, shaft, yukon, upgrade, c8.25-, chrysler, 8.25, 8.25", ya, Fits 1997-2003 Dodge Durango and 2007 and down Jeep Cherokee, 29 spline, 29 13/16" long, 5 lug, C52098902, YA C52098902
Description: *Fits 1997-2003 Dodge Durango and 2007 and down Jeep Cherokee *29 spline *29 13/16" long *5 lug Yukon Gear and Axle offers an extensive line of general replacement and high performance axles...More Details »
Item #: C52098902
Condition: New
Price: $136.90
Qty:

axle protection armor rearend diff guards,c8.25-bsfw,c8.25,8.25,jeep,chrysler,differential cover,diff cover
Description: We have redesigned the fabricated steel diff cover to be easier to assemble. The one piece folded steel body is laser cut from 1/4" steel plate. Professionally welded in our fabrication shop by...More Details »
Item #: DC:C8.25-BSFW
Condition: New
Price: $125.00
Qty:

axle protection armor rearend diff guards, SA825,c8.25-solid,c8.25,8.25
Description: Solid Diff Cover Features If your looking for serious protection in the rocks, Solid has the Dana 30 diff cover for you. The Solid differential cover is 1/4 inch thick with reinforced ribs and...More Details »
Item #: DC:C8.25-SOLID
Condition: New
Price: $105.00
Qty:

dodge detroit locker,chrysler locker,locking differential,detroit,8.25,27 spline,29 spline,187c-151a,187c,151a,187c-179a,179a,C8.25-DET-27,DET187C-151A,DET187,
Description: The Detroit is a fully automatic locking differential, if you need a dependable locker, that only unlocks when you need it to, the detroit is a good option. Select from option below for correct...More Details »
Item #: C8.25-DET-27
Condition: New
Price: $688.72
Qty:

dodge detroit locker,chrysler locker,locking differential,detroit,8.25,27 spline,29 spline,187c-151a,187c,151a,187c-179a,179a,c8.25-det-29,det187c-179a,c8.25,c8.25-
Description: The Detroit is a fully automatic locking differential, if you need a dependable locker, that only unlocks when you need it to, the detroit is a good option. Select from option below for correct...More Details »
Item #: C8.25-DET-29
Condition: New
Price: $688.72
Qty:

dodge detroit locker, chrysler locker, locking differential, detroit, 8.25, 27 spline, 29 spline, 187c-151a, 187c, 151a, 187c-179a, 179a, TT912A553,c8.25-det-tt-29,c8.25,c8.25-,c8.25-det,det,tt
Description: The True Trac limited slip uses a worm-gear design to bias torque from one tire to the other, providing extremely smooth operation. Since there are no clutches in this unit, there are no parts to...More Details »
Item #: C8.25-DET-TT-29
Condition: New
Price: $597.38
Qty:

yukon,luNchbox,locker,lockright,locrite,spartan,c8.25-sl-27,c8.25,c8.25-,sl c8.25-27,
Description: Spartan Locker for Chrysler 8.25" with 27 Spline axles. The Spartan Locker by USA Standard Gear is a mechanical locker that replaces the spiders in a standard case. The Spartan Locker's design does...More Details »
Item #: C8.25-SL-27
Condition: New
Price: $370.00
Qty:

yukon,luNchbox,locker,lockright,locrite,spartan,c8.25-sl-29,c8.25,c8.25-,sl c8.25-29,
Description: Spartan Locker for Chrysler 8.25" with 29 Spline axles. The Spartan Locker by USA Standard Gear is a mechanical locker that replaces the spiders in a standard case. The Spartan Locker's design does...More Details »
Item #: C8.25-SL-29
Condition: New
Price: $370.00
Qty:

jeep,8.25,chrysler,4.56,xj,jeep,C8.25-390-MG,C8.25,C8.25-,RING & PINION
Description: Motive ring and pinions are forged out of 8620 Steel. This is a quality Quiet gear, perfect for any vehicle from street use to offroad.
Item #: C8.25-390-MG
Condition: New
Price: $220.00
Qty:

jeep,8.25,chrysler,4.56,xj,jeep,C8.25-410-MG,C8.25,C8.25-,MG,RING & PINION
Description: Motive ring and pinions are forged out of 8620 Steel. This is a quality Quiet gear, perfect for any vehicle from street use to offroad.
Item #: C8.25-410-MG
Condition: New
Price: $195.00
Qty:

lock-right, powertrax, lock-right chrysler 8.25" locker, lock-right chrysler 8.25", powertrax lock-right, chrysler 8.25" locker, 1230, lock-right 1230, chrysler 8.25", chrysler, 8.25", powertrax lock-right locker, locker, 27 spline, open, gear, ratio, axl
Description: Lock-Right Chrysler 8.25" Locker Powertrax Lock-Right® #1230 Locker Features The Powertrax Lock-Right Chrysler 8.25" locker 1230 for your 27 spline axle with open carrier, can instantly lock...More Details »
Item #: PT-1230-LR
Condition: New
Price: $410.82
Sale: $225.00
Save: 45%
Save: $185.82
Qty:

c8.25-mik,c8.25,c8.25-,zk c8.25,chrysler,master install kit,8.25
Description: This is a full set up kit to do the job right. It includes: Carrier bearings Pinion Bearings Pinion Nut Pinion Seal Crush Sleeve or Preload Shims Pinion Shims Loctite...More Details »
Item #: C8.25-MIK
Condition: New
Price: $89.00

Chrysler, Jeep, 8.25, Dana, 60, D60, LubeLocker, lube, locker, differential, gasket, diff, cover, raleigh, durham nc, north, carolina, central, east, coast, gear, supply, transmission, stock, after, market, upgrade, d30, 30, d35, 35, d44, 44, d60, 60, for
Description: Throw your RTV away! Designed for uncompromising quality and performance in high demand motorsports, LubeLocker Gaskets are without equal. Rock crawlers, drag racers, circle track, and desert...More Details »
Item #: DG:C8.25-LUBELOCKER
Condition: New
Price: $22.00
Qty:

jeep,8.25,chrysler,3.73,xj,jeep,C8.25-373NG,C8.25,C8.25-,RING & PINION
Description: Nitro Gear Chrysler 3.73, All Nitro Gears are computer-controlled forgings, forged out of 8620 Steel, fully automated turning, Single pass cut, and then vacuum heat treated, the sum of these...More Details »
Item #: C8.25-373-NG
Condition: New
Price: $300.00
Qty:

jeep,8.25,chrysler,3.90,xj,jeep,C8.25-390-NG,RING & PINION,C8.25,C8.25-,NG
Description: Nitro Gear Chrysler 3.90, All Nitro Gears are computer-controlled forgings, forged out of 8620 Steel, fully automated turning, Single pass cut, and then vacuum heat treated, the sum of these...More Details »
Item #: C8.25-390-NG
Condition: New
Price: $300.00
Qty:

jeep,8.25,chrysler,4.11,xj,jeep,C8.25-411-NG,C8.25,C8.25-,RING & PINION,NITRO
Description: Nitro Gear Chrysler 4.11, All Nitro Gears are computer-controlled forgings, forged out of 8620 Steel, fully automated turning, Single pass cut, and then vacuum heat treated, the sum of these...More Details »
Item #: C8.25-411-NG
Condition: New
Price: $300.00
Qty:

jeep,8.25,chrysler,4.56,xj,jeep,C8.25-456-NG,C8.25,C8.25-,NITRO,NG,RING & PINION
Description: Nitro Gear Chrysler 4.56, All Nitro Gears are computer-controlled forgings, forged out of 8620 Steel, fully automated turning, Single pass cut, and then vacuum heat treated, the sum of these...More Details »
Item #: C8.25-456-NG
Condition: New
Price: $300.00
Qty:

jeep,8.25,chrysler,4.88,xj,jeep,C8.25-488-NG,C8.25,C8.25-,NITRO,RING & PINION
Description: Nitro Gear Chrysler 4.88, All Nitro Gears are computer-controlled forgings, forged out of 8620 Steel, fully automated turning, Single pass cut, and then vacuum heat treated, the sum of these...More Details »
Item #: C8.25-488-NG
Condition: New
Price: $300.00
Qty:

Jeep,cheerokee,1500,spider gear kit,c8.25-spider-27,c8.25,c8.25-,spider,ypkc8.25-s-29
Description: This kit includes spider gears, side gears, thrust washers, crossshaft, and retainer bolt. Select Spline count below: 96 and older came stock with 27 spline axles 97 and newer came stock with 29 Spline axles
Item #: C8.25-SPIDER-27
Condition: New
Price: $108.00

XP-SHAFT-C8.25, XP-, XP-SHAFT, XP-SHAFT-, XP-SHAFT-C, C8.25, CHRYSLER, 8.25, CROSS, CROSSPIN, SHAFT.
Description: Cross pin shaft for Chrysler 8.25"
Item #: XP-SHAFT-C8.25
Condition: New
Price: $22.00
Qty:

jeep,8.25,chrysler,3.55,xj,jeep,C8.25-355-NG,RING & PINION
Description: Yukon Ring and Pinion sets give you the confidence of knowing you're running gears designed for the harshest of conditions. Whether it's on the street, off-road, or at the track; Yukon ring and...More Details »
Item #: C8.25-355-YG
Condition: New
Price: $284.93
Qty:

SKCSM35, solid spacer, dana 35, d35, ford 8", f8, c8.25, chrysler, chrysler 8.25, SS-D35, SS, SS-, SS-D, SS-D3
Description: Includes: Machined Solid Pinion Pre-load Spacer Pre-load Adjustment Shims Application: Ford 8", Dana 35. Chrysler 8.25" Nitro's Solid Pinion Preload spacers increase...More Details »
Item #: SS-D35
Condition: New
Price: $25.00
Qty:

ox ford 8.8" air locker, ox ford 8.8", ox, ford 8.8" locker, oxf88c273h-31, ford 8.8", ford, 8.8", ox air locker, air locker, air, locker, 31 spline, 2.73 & up, gear, ratio, axle, differential, diff, locking, spline, posi-traction, rock, off-road, 4x4, ge
Description: Ford 8.8 OX® Locker #C825-273-27 Diff Locker Features The OX Chrysler 8.25 locker, for your 27 spline axle for 2.73 & up gear ratios, can instantly lock differentials and allow you to tackle...More Details »
Item #: OXC8.25-27
Condition: New
Price: $840.00

ox ford 8.8" air locker, ox ford 8.8", ox, ford 8.8" locker, oxf88c273h-31, ford 8.8", ford, 8.8", ox air locker, air locker, air, locker, 31 spline, 2.73 & up, gear, ratio, axle, differential, diff, locking, spline, posi-traction, rock, off-road, 4x4, ge
Description: Ford 8.8 OX® Locker #C825-273-29 Diff Locker Features The OX Chrysler 8.25 locker, for your 29 spline axle for 2.73 & up gear ratios, can instantly lock differentials and allow you to tackle...More Details »
Item #: OXC8.25-29
Condition: New
Price: $840.00

gm8.5 gm 8.6 bolt coporate wheel bearing seal kit 10,Wheel Bearing Kit 1559/6408,C7.25,C8.25,C9.25,F8.8,F9.75,GM12T,GM8.0,GM8.5,and Most common 1/2 Ton C-Clips,Rear Axle Bearing and Seal Kit,2.530" OD / 1.620" ID,1 Side,Ref AK 1559 / 6408,abkr,abkr-1559/6
Description: Rear Axle Bearing and Seal Kit - 1 Side - Includes Bearing and Seal 2.530" Outside Diameter / 1.620" Inside Diameter Fits: Chrysler 7.25" Chrysler 8.25" Chrysler 9.25" Ford 8.8...More Details »
Item #: ABKR-1559/6408-F8.8
Condition: New
Price: $17.50
Qty:

Items 1-30 of 30