East Coast Gear Supply - GM 9.5 14 Bolt

GENERAL MOTORS - GM 9.5 14 Bolt
FITS:
K10,K15 (90-Present)
K20, K25 (81-Present)
K30, K35 (89-Present)
C10, C15 (90-Present)
C20 (81-Present)
C30, C35 (83-Present)
H2 Hummer(02-Present)

Select a Sub-Category

View  
GENERAL MOTORS - GM 9.5 14 Bolt - CARRIERS / SPIDER GEARS/ SMALL PARTS
CARRIERS / SPIDER GEARS/ SMALL PARTS
GENERAL MOTORS - GM 9.5 14 Bolt - COVERS / AXLE ARMOR UPGRADE PARTS
COVERS / AXLE ARMOR UPGRADE PARTS
GENERAL MOTORS - GM 9.5 14 Bolt - INSTALL KITS/ BEARINGS/ SEALS/ SHIMS
INSTALL KITS/ BEARINGS/ SEALS/ SHIMS
GENERAL MOTORS - GM 9.5 14 Bolt - LOCKERS, POSI's
LOCKERS, POSI's
GENERAL MOTORS - GM 9.5 14 Bolt - RING AND PINIONS
RING AND PINIONS

GM 9.5 14 Bolt Featured Products

Sort
View
 
Items 1-26 of 26
axle protection armor rearend diff guards,BTF11001,GM9.5-BSFW,GM9.5,GM,
Description: The 14 Semi Float Bolt Differential cover is designed with pure function in mind. Like all of the Kryptonite Series Diff Covers the 14 Bolt cover is fabricated with 1/4 inch steel plate for the...More Details »
Item #: GM9.5-BSFW
Condition: New
Not Available
Price: $125.00
YPKGM9.5-S-33,GM9.5-IPK-S-33,GM9.5-IPK-S,GM9.5-IPK,GM9.5,GM,IPK,YUKON,SPIDER GEAR KIT FOR 9.25" AND 9.5" GM IFS W/33SPLINE AXLE,33 SPLINE
Description: *Spider gear kit *Fits GM 9.5" open differential *Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers. Yukon uses higher quality materials...More Details »
Item #: GM9.5-IPK-S-33
Condition: New
Price: $210.20
Qty:

GM,Chevy,spool,automatic,locker,locking,differential,14,bolt,semi, floating
Description: The Detroit is a fully automatic locking differential, if you need a dependable locker, that only unlocks when you need it to, the detroit is a good option.
Item #: 225C-135A
Condition: New
Price: $740.00
Qty:

gm, 9.5, posi, positraction, 30 spline, nitro, diff, differential, limited slip, carrier, bearings, kit, discount, wholesale, rock, climbing, 4x4, parts, 4x4 parts, off-road, sales, service, tools, raleigh nc, durham nc, raleigh, durham, nc, north carolin
Description: If you have had a GM 9.5 spider gear failure, or a G80 (Gov. Lock) Failure now is a great time to upgrade to this Yukon - GM 9.5 Posi (Positraction) aftermarket differential. The Yukon posi...More Details »
Item #: GM9.5-POSI-33
Condition: New
Price: $594.97
Qty:

Motive Gear GM 9.5- Ring and Pinion 3.42 Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet ge
Description: Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet gears.
Item #: GM9.5-342-MG
Condition: New
Price: $220.00
Qty:

Motive Gear GM 9.5- Ring and Pinion 3.42 Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet ge
Description: Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet gears.
Item #: GM9.5-373-MG
Condition: New
Price: $220.00
Qty:

Motive Gear GM 9.5- Ring and Pinion 3.42 Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet ge
Description: Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet gears.
Item #: GM9.5-410-MG
Condition: New
Price: $220.00
Qty:

Motive Gear GM 9.5- Ring and Pinion 3.42 Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet ge
Description: Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet gears.
Item #: GM9.5-456-MG
Condition: New
Price: $220.00
Qty:

Motive Gear GM 9.5- Ring and Pinion 3.42 Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet ge
Description: Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet gears.
Item #: GM9.5-488-MG
Condition: New
Price: $239.99
Qty:

yukon Gear GM 9.5- Ring and Pinion 3.42 Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet gea
Description: Original Factory gear for GM 9.5" in a 3.73 ratio. OEM gears are recommended for quiet applications where noise may be an issue. Factory gears are the quietest application available on the market...More Details »
Item #: GM9.5-373-OE
Condition: New
Price: $330.00
Qty:

yukon Gear GM 9.5- Ring and Pinion 3.42 Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet gea
Description: Original Factory gear for GM 9.5" in a 4.10 ratio. OEM gears are recommended for quiet applications where noise may be an issue. Factory gears are the quietest application available on the market...More Details »
Item #: GM9.5-410-OE
Condition: New
Price: $330.00
Qty:

GM9.5-DET-TT,GM9.5-DET,GM9.5,GM,DET,DET-TT,DETROIT TRUE TRAC,TRUE TRAC,TT914A538
Description: A very good limited slip, the clutchless design makes this an outstanding product that does not wear out. It also does not require special fluid. No clutches to burn, crack or spin. If your looking...More Details »
Item #: GM9.5-DET-TT
Condition: New
Price: $560.90
Qty:

yukon Gear GM 9.5- Ring and Pinion 3.42 Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet gea
Description: Yukon Gears are computer-controlled forgings, forged out of 8620 steel, fully automated turning, single pass cut, and then vacuum heat treated. The sum of these processes is the ultimate...More Details »
Item #: GM9.5-342-YG
Condition: New
Price: $265.85
Qty:

yukon Gear GM 9.5- Ring and Pinion 3.42 Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet gea
Description: Yukon Gears are computer-controlled forgings, forged out of 8620 steel, fully automated turning, single pass cut, and then vacuum heat treated. The sum of these processes is the ultimate...More Details »
Item #: GM9.5-373-YG
Condition: New
Price: $265.85
Qty:

yukon Gear GM 9.5- Ring and Pinion 3.42 Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet gea
Description: Yukon Gears are computer-controlled forgings, forged out of 8620 steel, fully automated turning, single pass cut, and then vacuum heat treated. The sum of these processes is the ultimate...More Details »
Item #: GM9.5-410-YG
Condition: New
Price: $265.85
Qty:

yukon Gear GM 9.5- Ring and Pinion 3.42 Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet gea
Description: Yukon Gears are computer-controlled forgings, forged out of 8620 steel, fully automated turning, single pass cut, and then vacuum heat treated. The sum of these processes is the ultimate...More Details »
Item #: GM9.5-456-YG
Condition: New
Price: $265.85
Qty:

yukon Gear GM 9.5- Ring and Pinion 3.42 Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet gea
Description: Yukon Gears are computer-controlled forgings, forged out of 8620 steel, fully automated turning, single pass cut, and then vacuum heat treated. The sum of these processes is the ultimate...More Details »
Item #: GM9.5-488-YG
Condition: New
Price: $265.85
Qty:

yukon Gear GM 9.5- Ring and Pinion 3.42 Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet gea
Description: Yukon Gears are computer-controlled forgings, forged out of 8620 steel, fully automated turning, single pass cut, and then vacuum heat treated. The sum of these processes is the ultimate...More Details »
Item #: GM9.5-513-YG
Condition: New
Price: $265.85
Qty:

yukon Gear GM 9.5- Ring and Pinion 3.42 Motive Gear ring and pinions are forged out of 8620 Steel, CNC Throughout, Computer Controlled Heat Treatment, Index Tooth Spacing, Central Contact Pattern, and Cutting Edge Lapping. These are high quality quiet gea
Description: Yukon Gears are computer-controlled forgings, forged out of 8620 steel, fully automated turning, single pass cut, and then vacuum heat treated. The sum of these processes is the ultimate...More Details »
Item #: GM9.5-538-YG
Condition: New
Price: $265.85
Qty:

GM9.5-MIK-A,GM9.5-MIK,GM9.5,GM,GM9.5-A,MASTER INSTALL KIT
Description: This is a full set up kit to do the job right. It includes: Carrier bearings Pinion Bearings Pinion Nut Pinion Seal Crush Sleeve or Preload Shims Pinion Shims Loctite...More Details »
Item #: GM9.5-MIK-A
Condition: New
Price: $205.00
Qty:

GM9.5-MIK-B-TK,GM9.5-MIK-B,GM9.5-MIK,GM9.5,GM,MASTER INSTALL KIT,GM9.5-B
Description: This is a full set up kit to do the job right. It includes: Carrier bearings Pinion Bearings Pinion Nut Pinion Seal Crush Sleeve or Preload Shims Pinion Shims Loctite...More Details »
Item #: GM9.5-MIK-B-TK
Condition: New
Price: $205.00
Qty:

GM 14 bolt 10.5 9.5 chevy gmc Lok Rite Lock Right PT Richmond Gear Power Trax PT-1955 PT-1950 1955 1950,GM9.5-PT-1950,GM9.5-PT,GM9.5,GM,PT 1950
Description: If you need traction to both wheels at a low cost, a Lockright is your answer. Its simple design has proven itself as capable and dependable in the most demanding conditions. In addition these units come with a manufacturers 2 year warranty.
Item #: GM9.5-PT-1950
Condition: New
Price: $444.59
Qty:

PINSU6,GM 9.5 14 BOLT SEMI FLOAT PINION BEARING SET UP KIT,PINION BEARING
Description: These bearings are perfect for the master installer or the first timer. They are honed to slide on and off the bearing surface by hand allowing you to easily change the pinion shim to achieve that...More Details »
Item #: PINSU6
Condition: New
Price: $79.99
Qty:

GM9.5-MINI,GM9.5-A,GM9.5,GM,MINI,PINION NUT
Description: Kit includes: -Pinion Nut -Pinion Seal -Crush Sleeve or preload shims -Pinion Shims -Adjustable Differential Shims
Item #: GM9.5-MINI
Condition: New
Price: $39.99
Qty:

GM9.5-PIK,GM9.5-A,GM9.5,GM,PINION INSTALL KIT,PIK
Description: This kit is perfect for fixing a bad pinion bearing, but for new gear set-ups we recomend the Master Install kit. -Pinion Bearings -Pinion Nut -Pinion Seal -Crush Sleeve or preload shims...More Details »
Item #: GM9.5-PIK
Condition: New
Price: $170.00
Qty:

YSPPN-018,PN-018,PINION NUT,PINIONPINION NUT 018
Description: Pinion nut for GM 7.2", 7.5", 7.625", 8.0", 8.25" IFS, 8.5", 8.6", 9.25" IFS and 9.5" 7/8" x 14 thread 1 1/4" socket
Item #: PN-018
Condition: New
Price: $7.50
Qty:

Items 1-26 of 26