East Coast Gear Supply - Steering Kits and Parts
Steering arms, tie rods, drag links and hardware for the the '79-'85 Toyota solid front axle
Browse Steering Kits and Parts Products
Items 1-10 of 10
Description: 6-Stud steering knuckles for Toyota 8" front axles. These knuckles eliminate the common problem of broken steering arm studs by adding an extra 2 studs per side to increase the clamping force between the arm and knuckle.
Item #: STEERING 6-STUD
Description: Heavy duty FJ-80 tie rod ends are ideal for Toyota crossover steering applications. These rod ends are greased for life and sealed. Includes cotter pin and jam nut.
Item #: TROD-FJ80-L
Limited Supply: Only 5 Left!
Description: The Rock-Assault™ Ram Steering assist kit is the best kit you will find anywhere! Our Toyota kit features a 6" X 1.5" stroke hydraulic ram with high temp inner and outer seals for long life and...More Details »
Item #: HAS-2.0-8
Description: If you're installing crossover steering on your 79-85 4wd Toyota you're going to need to mount an IFS steering box. This frame mount kit includes both inner and outer frame reinforcing plates,...More Details »
Item #: TG-IFS-STEER-MT
Description: Factory Toyota knuckle hardware. Fits 1979-1985 Toyota front solid axle knuckle and a 1990-1997 Toyota FJ80 Landcruiser. SOLD INDIVIDUALLY
Item #: TG-HS-WASHER-CONE
TG-STEER-ARMS-4,130002-1-KIT,Toyota Hi-Steer Arms,HI-STEER,STEERING
Description: Forged Hi-Steer arms for the '79-'85 Toyota front axle. All surfaces are machined for precison and accuracy. Tie rod and drag link holes are machined for Fj-80 TRE taper
Item #: TG-STEER-ARM-4
TG-HS-TOY-4-KIT,130001-1-KIT,Toyota Hi-Steer Kit,HI STEER,STEERING,TOYOTA
Description: Get rid of that weak stock Toyota tie rod and push pull steering and upgrade to our Hi-Steer setup. Kit includes left and right steering arms, 4 Fj-80 tie rod ends and jam nuts, pitman arm and...More Details »
Item #: TG-HS-TOY-4-KIT
Limited Supply: Only 2 Left!
hi,steer,pitman,toyota,flat,crossover,high,130020-1-KIT,130599-1-KIT,drop,TG-PITMAN,130599-1-KIT,Toyota Pitman Arm
Description: Solid one piece design. Features FJ80 tapered hole. Extra strong and wide, one piece, forged design. Ideal for use with crossover steering.
Item #: TG-PITMAN-D
Description: Tired of wiping big clumps of dirty sandy grease off of your knuckle balls after every trip? So are we. We asked our engineering department to look at the problems with the OEM design along with...More Details »
Item #: TG-KNUCKLE-SEAL-KIT
Description: Anyone who wheels hard, rock crawls, or rock races has experienced blown up trunnion bearings, no matter what size bearings they are using, the bearing is always the point of failure. The Rock...More Details »
Item #: TG-TRUNION-ELIM
Items 1-10 of 10