East Coast Gear Supply - Suspension Kits and Parts
Trail Gear Lift Kits and Suspension Parts
Browse Suspension Kits and Parts Products
Items 1-15 of 15
toyota,leaf,springs,spring,front,lift,crawler,long,travel,TG-LEAF-SPRNG-F-HD-5,110065-1-KIT,Toyota Front Leaf Springs
Description: Top quality Toyota front leaf springs. Designed to handle years of abuse and never sag. Available in 3", 4", 5" and 5" heavy duty for V8 swaps and heavy bumpers. Springs are 47" long as measured...More Details »
Item #: TG-LEAF-SPRNG-F-HD-5
Description: Kit that turns your stock toyota driveshaft into a long travel unit for long travel suspension setups. A must with any SAS kit to prevent your driveshaft from pulling apart under suspension droop
Item #: D-SHAFT-TOY-TG
Description: Weld-on lower shock mounts for Toyota front or rear 8" axles. Mount has radius cut on all 4 sides so it can be turned in any direction. Mounts are made of 3/16" plate with 1/2" holes. Sold in pairs
Item #: BRKT:SM-TOY
toyota,4,link,rear,four,off,road,4wd,TOY 4-LINK,140226-1-KIT,Toyota Rear 4-Link Kit
Description: Kit to install a rear 4-Link kit in your Toyota truck. Kit requires extensive vehicle modification including moving the gas tank and installing air shocks or coil overs.
Item #: TOY 4-LINK
Description: Pair of weld-on spring perches for Toyota 8" rear axles. Made from 1/4" plate, these perches are much stronger than stock. Drilled with 3 center pin holes that allow you to move your axle 1" forward or rear from stock.
Item #: BRKT-SPR-PRCH-3.125-TG
BRKT-T-BAR-MT-TG,111333-1-kit,toy,toyota,rear traction bar mount,mount,bar
Description: Weld-on mount for installing a traction bar on the rear of your Toyota Pickup or 4Runner. Takes the guesswork out of making the bracket so that you can spend less time welding and more time wheeling.
Item #: BRKT-T-BAR-MT-TG
rear,toyota,springs,lift,off,road,travel,long,swap,TG-LEAF-SPRNG-R-5,110014-1-KIT,Toyota Rear Leaf Springs
Description: Replacement rear lift springs for Toyota Pickups and 4Runners. Springs are 56 5/8" long as measured along the top leaf. Pin to center of front mount is 27 1/2", pin to center of rear mount is 29...More Details »
Item #: TG-LEAF-SPRNG-R-5
shackle,hangar,stock,toyota,chevy,63", 110027-1-K, 110027-1, 110027,BRKT-SHKL-MT-TOY-R-TG
Description: Pair of weld-on rear shackle mounts for Toyota Pickups and 4Runners. Uses stock Toyota shackle bushings. Allows you to move your shackle forward or backward to change shackle angle or use different spring combinations.
Item #: BRKT-SHKL-MT-TOY-R-TG
hanger,spring,rear,toyota, 110031-1-KIT, 110031, 110031-1,BRKT-SPR-MT-TG-SL
Description: Welded hangers are made by welding two plates together, leaving a tab on one side. This tab makes it easier to install. The tab positions the hanger on the frame. Holes on top of hangers allow...More Details »
Item #: BRKT-SPR-MT-TG-SL
hanger, hangers, toyota, springs, spring, sloped, 110029-1-kit, 110029-1, 110029,BRKT-SPR-MT-R-SL-TG
Description: Pair of weld-on spring hangars for Toyota rear springs. Have a sloped leading edge to prevent hangups on rocks and other obstacles
Item #: BRKT-SPR-MT-R-SL-TG
Description: Weld-on shock hoops for Toyota Pickups and 4Runners. Allow the use of long travel shocks. 13" version will accept both 12" and 14" shocks. Includes 2 hoops, 2 bolts, 2 nuts and 4 tube braces.
Item #: BRKT-SHK-HPS
toyota,sas,axle,front,kit,solid,swap,TOY SAS,Toyota Truck and 4Runner SAS Kit
Description: Kit to replace your factory IFS setup with a Toyota solid front axle. This kit is designed to use a donor axle from a '79-'85 Toyota pickup or '84-'85 4Runner. Kit includes everything needed for...More Details »
Item #: TOY SAS
TG-SPRINGHANGER-KIT,110010-1-KIT,TOYOTA SPRING HANGER KIT
Description: Toyota Front Spring hanger kit for installation of leaf springs on IFS 86-95 toyotas
Item #: TG-SPRINGHANGER-KIT
wheel,spacer,toyota,solid,axle,6,lug,off,road,aluminum,TOY SPACER,140004-1-KIT,Toyota Wheel Spacers
Description: High quality aluminum wheel spacers for Toyota Pickups, 4Runners, FJ Cruisers, Tacomas and many others. Spacers are 6x5.5" lug pattern and are available in a variety of widths. Sold in pairs, includes lug nuts.
Item #: TOY SPACER
u,bolt,flip,u-bolt,toyota,UBK-3.25,110042-1-KIT,U-BOLT FLIP KIT
Description: Kit to replace your stock square style u-bolts with round style that goes under the axle to protect the threads from rocks and abuse. Kit includes 4 u-bolts, 8 nuts, 8 hardened washers and 2 u-bolt plates.
Item #: UBK-3.25
Items 1-15 of 15