- Home »
- Catalog »
- GEARS, INSTALL KITS, CARRIERS, SPIDER GEARS »
- DANA SPICER GEARS »
- Dana 60 (D60)
East Coast Gear Supply » ECGS
Browse Dana 60 (D60) Products
Description: Kit Includes:
Two 13" Vented Rotors
Left and Right Two Piston Calipers
Brake Pads
Left and Right Caliper Brackets
Four Caliper Bracket Bolts
Sixteen Wheel Studs
ONLY FITS CHEVY KINGPIN...More Details »
Item #: DBK-F8B
Condition:
New
Price: $715.00
Description: D50, D60 Front Wheel Seal - 3.88' OD / 2.65' ID
Fits:
1978-1997 Ford Front
1978-1988 GM Front
1974-1993 Dodge Front
Item #: ABKSF-D60-3.88
Condition:
New
Price: $10.00
axle protection armor rearend diff guards blue torch fab,d60-bsfw,d60, R2258
Description: Ring and the Cover are 3/8" thick
Plate steel cover bent 8 ways
Machined absolutely flat for a perfect fit
All seams fully welded inside and out
This is our basic differential cover, we see...More Details »
Item #: DCD60-DS-FAB-SD
Condition:
New
Price: $175.00
DANA 60 HONED BEARINGS SET UP BEARINGS DIFFERENTIAL TOOLS DUMMY BEARINGS, bearing, set up, set, up, removable, install, mik, bsk, d60-, d60-bsk, d60-bsk-
Description: These bearings are perfect for the master installer or the first timer. They are honed to slide on and off the bearing surface by hand allowing you to easily change the carrier shims to achieve the...More Details »
Item #: D60-BSK
Condition:
New
Price: $95.00
dana,60,d60,front,axle,king,pin,rebuild,kit 41866, D60200K, bronze, bushing, D60-KP-BUSH-KIT, D60-, D60-KP, D60-KP-, D60-KP-BUSH, D60-KP-BUSH-, kit
Description: Heavy-Duty bronze upper kingpin bushings for Dana 60 steering knuckles are designed to replace the OEM nylon cone bushings in severe-duty applications where the OEM bushings succumb to accelerated...More Details »
Item #: D60-KP-BUSH-KIT
Condition:
New
Price: $95.00
d60-det-package,det special,d60-det-detroit,d60,detroit special,dana 60
Description: Dana 60 Detroit package deal.
D60 35 Spline Detroit- DET225S-29A or DET225S-29B
DANA 60 Gear (Standard or Rev.)
Master Install Kit
Also add Chromoly shafts, U-Joints, and hubs at...More Details »
Item #: D60-DET-PACKAGE
Condition:
New
Price: $1,200.00
dana 60 drive flange kit,dana 60 drive flange,dana 60,drive flange,35 spline slugs,spline,slugs,dana,60,drive,flange,kit,locking,hubs,35,drivetrain parts,east coast gear supply,d60-slug-ecgs,d60-slug,d60,ecgs
Description: Can't keep your locking hubs from breaking, upgrade to this Dana 60 Drive Flange kit with 35 spline drive slugs
Dana 60 Drive Flange Kit w/Slugs includes:
2- Drive Slugs
2- Aluminum Cap...More Details »
Item #: DFK-D60-35E
Condition:
New
Price: $225.00
dana 60 drive flange kit,dana 60 drive flange,dana 60,drive flange,35 spline slugs,spline,slugs,dana,60,drive,flange,kit,locking,hubs,35,drivetrain parts,east coast gear supply,d60-slug-sd,d60-slug,d60
Description: Can't keep your locking hubs from breaking, upgrade to this Dana 60 Drive Flange kit with 35 spline drive slugs
Dana 60 Drive Flange Kit w/Slugs includes:
2- Drive Slugs
2- Aluminum Cap...More Details »
Item #: DFK-D60SD-35E
Condition:
New
Price: $300.00
dana 60 drive flange kit,dana 60 drive flange,dana 60,drive flange,40 spline slugs,spline,slugs,dana,60,drive,flange,kit,locking,hubs,40,drivetrain parts,east coast gear supply,d60-slug-sd,d60-slug,d60, D60SD-SLUG-40-ECGS, D60SD, D60SD-, D60SD-SLUG, D60SD-SLUG-40, D60SD-SLUG-40-, D60SD-SLUG-40-ECGS
Description: Can't keep your locking hubs from breaking, upgrade to this Dana 60 Drive Flange kit with 40 spline drive slugs
Dana 60 Drive Flange Kit w/Slugs includes:
2- Drive Slugs
2- Aluminum Cap...More Details »
Item #: DFK-D60SD-40E
Condition:
New
Price: $300.00
dana,60,drive,flanges,35,spline,4340,chromoly,double,splined,axles,d60-slug-dodge,d60-slug-dodge-35-ecgs,d60-slug,d60
Description: Dodge Dana 60 external Drive flanges / Slugs, If you want to run 35 spline shafts on your external hub 60. These flanges bolt up and allow you to do so. Made from 4340 chromoly. Fits Dodge axles...More Details »
Item #: DFK-D60DG-35E
Condition:
New
Price: $275.00
ast-d60, ast, tube seal, seal, seals, seals-it, eas1, eas2-05, ast-d60-, ast-d60-tube, ast-d60-tube
Description: Seals-it Axle Seals Size 2 for Dana 60 and Tubes 2-1/8" to 2-1/4". Two Required Per Axle
Item #: AST-D60-TUBE
Condition:
New
Price: $45.00
ast-d60, ast, tube seal, seal, seals, seals-it, eas1, eas1-05, ast-d60-, ast-d60-tube, ast-d60-tube-, ast-d60-tube-l
Description: Seals-it Axle Seals Size 2 for Dana 60 and Tubes 2-1/2" to 2-3/4". Two Required Per Axle
Item #: AST-D60-TUBE-L
Condition:
New
Price: $45.00
asi-d60, dana 60 axle seal, inner axle seal, d60, Fits 35 spline common D60 - 2.626"OD / 1.450" ID - Ref YMS470682 / DS 36487
Description: Fits 35 spline common Dana 60 - 2.626"OD / 1.450" ID - Ref# DS 36487
Item #: ASI-D60
Condition:
New
Price: $12.00
dana,dana 60,wheel bearing kit,front,axle,wheel hub kit,abkf-d60,abkf-,abkf-d,d60,ak d60f
Description: Dana 60 Front Wheel Bearing Kit:
-HUB Seal
-Inner Bearing- Timken 387A
-Inner Race- Timken 382A
-Outer Bearing- Timken LM104949
-Outer Race- Timken LM104911
Fits: Dana Spicer 50 and...More Details »
Item #: ABKF-D60
Condition:
New
Price: $70.00
d60-mik-dis-a,d60-mik-dis,d60-mik,d60,zk d60-dis,master install kit,install kit,dana 60
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: D60-MIK-DIS-A
Condition:
New
Price: $245.00
DODGE DANA 60 MASTER INSTALL KIT DISCONNECT AXLE 32 SPLINE,d60-mik-dis-b,d60-mik-dis,d0-mik,d60,d60-mik-di
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: D60-MIK-DIS-B
Condition:
New
Price: $245.00
d60-mik-f,zk d60-f,master install kit,d60-mik,d60
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: D60-MIK-FR
Condition:
New
Price: $240.00
d60-mik-r,d60-mik,d60,zk d60-r,master install kit
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: D60-MIK-R
Condition:
New
Price: $225.00
DANA 60 PINION INSTALL KIT BEARINGS SEALS RING AND PINION INSTALL KIT,d60-pik,pk d60-r,
Description: This kit is perfect for fixing a bad pinion bearing, but for new gear set-ups we recommend the Master Install kit.
-Pinion Bearings
-Pinion Nut
-Pinion Seal
-Crush Sleeve or preload shims
-Pinion Shims
-Loctite
-Marking Compound
Item #: D60-PIK
Condition:
New
Price: $100.00
yukon dana 60 mini install kit,d60-mini,d60,mk d60-r,mini install kit
Description: Kit includes:
-Pinion Nut
-Pinion Seal
-Crush Sleeve or preload shims
-Pinion Shims
-Adjustable Differential Shims
**ADD CORRECT INNER SEALS IN DROP DOWN OR SELECT REAR IF NOT NEEDED**
Item #: D60-MINI
Condition:
New
Price: $53.00
dana,60,d60,front,axle,king,pin,rebuild,kit,d60-kp-rebuild,d60,ds 706395-r
Description: Dana 60 Kingpin knuckle rebuild kit. Includes:
*1 lower bearing set (Timken)
*1 lower seal
*1 upper seal
*1 lower retaining plate
*1 king pin
*1 nylon bushing
*1 spring, 1 washer
*1 steel...More Details »
Item #: D60-KP-REBUILD
Condition:
New
Price: $110.00
dana,60,d60,front,axle,king,pin,rebuild,kit,d60-kp-seal-up-f,d60,41778
Description: Dana 60 Upper Kingpin Seal - Ref 41778.
Item #: D60-KP-SEAL-UP-F
Condition:
New
Price: $4.50
Description: Kit Includes:
Upper Cap
Set Screw with Zerk Fitting
Jam Nut
Preload Plate
Four Bolts
Sold Individually!
Item #: D60-KP-CAP-UPPER-B
Condition:
New
Price: $55.00
dana 60 power lok lock dodge posi cummins traction limited slip 1 ton positraction
Description: This is a complete positraction limited slip unit at a great price. Power lock's offer great onroad and offroad performance. These units will provide you with the traction your looking for with...More Details »
Item #: D60-P/L-3-30
Condition:
New
Price: $550.00
dana 60 power lok lock dodge posi cummins traction limited slip 1 ton positraction
Description: This is a complete positraction limited slip unit at a great price. Power lock's offer great onroad and offroad performance. These units will provide you with the traction your looking for with...More Details »
Item #: D60-P/L-3-32
Condition:
New
Price: $550.00
dana 60 power lok lock dodge posi cummins traction limited slip 1 ton positraction,d60-p/l-3-35,d60,p/l-d60-3-35
Description: This is a complete positraction limited slip unit at a great price. Power lock's offer great on road and offroad performance. These units will provide you with the traction your looking for with good street manners.
Item #: D60-P/L-3-35
Condition:
New
Price: $550.00
dana 60 power lok lock dodge posi cummins traction limited slip 1 ton positraction,d60-p/l-4-30,d60
Description: This is a complete positraction limited slip unit at a great price. Power lock's offer great onroad and offroad performance. These units will provide you with the traction your looking for with...More Details »
Item #: D60-P/L-4-30
Condition:
New
Price: $550.00
dana 60 power lok lock dodge posi cummins traction limited slip 1 ton positraction,d60-p/l-4-30,d60
Description: This is a complete positraction limited slip unit at a great price. Power lock's offer great onroad and offroad performance. These units will provide you with the traction your looking for with...More Details »
Item #: D60-P/L-4-32
Condition:
New
Price: $550.00
dana 60 power lok lock dodge posi cummins traction limited slip 1 ton positraction,d60-p/l-4-35,d60
Description: This is a complete positraction limited slip unit at a great price. Power lock's offer great onroad and offroad performance. These units will provide you with the traction your looking for with...More Details »
Item #: D60-P/L-4-35
Condition:
New
Price: $550.00
d60-r/g-spacer,mrg904a,d60,spacer,ring gear spacer,3 series dana 60
Description: Dana 60 Ring Gear Spacer. Used to run 4 series gears on a 3 series carrier. Also used to gear Dana 61.
Item #: D60-R/G-SPACER
Condition:
New
Price: $74.33
Description: Dana Solid Spacer with Pinion Preload Shims For Crush Sleeve Gears
Item #: SS-D60-EC
Condition:
New
Price: $30.00
dana,60,spider,gears,spider,gear,kit,30,spline, d60-, d60, d60-ipk, d60-ipk-s, d60-ipk-s-30, dana, spicer, dana spicer
Description: This kit includes spider gears, side gears,thrust washers, cross pin, and cross pin retainer. Spider gear kit fits Dana 60 one piece open carrier only! Does not fit 2 piece case or limited slip...More Details »
Item #: D60-IPK-S-30
Condition:
New
Price: $105.00
dana,60,spider,gears,spider,gear,kit,32,spline, d60-, d60, d60-ipk, d60-ipk-s, d60-ipk-s-32, dana, spicer, dana spicer
Description: This kit includes spider gears, side gears,thrust washers, cross pin, and cross pin retainer. Spider gear kit fits Dana 60 one piece open carrier only! Does not fit 2 piece case or limited slip...More Details »
Item #: D60-IPK-32
Condition:
New
Price: $105.00
dana,60,spider,gears,spider,gear,kit,35,spline, d60-, d60, d60-ipk, d60-ipk-s, d60-ipk-s-35, dana, spicer, dana spicer
Description: This kit includes spider gears, 35 spline side gears,thrust washers, cross pin, and cross pin retainer. Spider gear kit fits Dana 60 one piece open carrier only! Does not fit 2 piece case or...More Details »
Item #: D60-IPK-35
Condition:
New
Price: $105.00
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-gm/d,d60-spindle,d60,spindle,gm reid solid crane spindle,700013
Description: DANA SPICER REFERENCE PART # 700013
Manufactured by ECGS
Fits Chevy, Dodge, and GM Dana 60 Spindle:
* 7.5" Long
* 7" Flange
* 6 HOLES
* Bearing Journals 2.020" X 2.255"
* Spindle...More Details »
Item #: D60-SPINDLE-GM/D
Condition:
New
Price: $120.00
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-f-l,d60-spindle,d60,spindle,gm reid solid crane spindle,708085
Description: DANA SPICER REFERENCE PART # 708085
Manufactured by ECGS
Fits Ford 1993 -1998 Dana 60 Spindle, check flange width Pre 92 spindle has 6.5" flange and was used in later applications also:
* 7"...More Details »
Item #: D60-SPINDLE-FORD-L
Condition:
New
Price: $140.00
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-f-e,d60-spindle,d60,spindle,gm reid solid crane spindle,700022
Description: DANA SPICER REFERENCE PART # 700022
Manufactured by ECGS
Fits all Ford 92 and Earlier Dana 60 Spindle and some later check flange width late spindle has 7" Flange:
* 7" Long
* 6.5" Flange...More Details »
Item #: D60-SPINDLE-FORD-E
Condition:
New
Price: $140.00
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-brg,d60-spindle,d60,spindE, SBK-5, YSPSP-024-V2
Description: DANA SPICER PART # 700014 Dana 60 Spindle Bearing and Seal Kit
Includes: Bearing, two Seals and Thrust Washer.
Three Seal: Factory Style Kit. Includes: Bearing, Two Seals and Thrust...More Details »
Item #: D60-SPINDLE-BRG-2
Condition:
New
Price: $30.50
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-brg,d60-spindle,d60,spindle,700014
Description: DANA SPICER PART # 700014 Dana 60 Spindle Bearing and Seal Kit
Includes: Bearing, two Seals and Thrust Washer.
Three Seal: Factory Style Kit. Includes: Bearing, Two Seals and Thrust...More Details »
Item #: D60-SPINDLE-BRG
Condition:
New
Price: $28.50
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-bush,d60-spindle,d60,spindle,bushing
Description: Tired of your needle bearings failing and damaging your spindle or stub shaft? These bushings the bearing, comes with a new thrust washer and spindle seal. Works with 30 spline and 35 spline stubs....More Details »
Item #: D60-SPINDLE-BUSH-EC
Condition:
New
Price: $26.00
locker,spool,traction,DANA 60,FULL SPOOL 30 SPLINE,d60-spool-3-30,d60-spool,d60-spool,3,yp,fsd60-3-30
Description: * Fits Dana Spicer 60 with 30 spline axles
* 4.10 and down ratio only
* Provides 100% traction to both wheels at all times
* Not recommended for street driven vehicles
Item #: D60-SPOOL-3-30
Condition:
New
Price: $318.60
Sale: $275.00
Save: 14%
Save: $43.60
locker,spool,traction,DANA 60,FULL SPOOL 35 SPLINE,d60-spool-3-35,d60-spool,d60-spool,3,yp,fsd60-3-35
Description: * Fits Dana Spicer 60 with 35 spline axles
* 4.10 and down ratio only
* Provides 100% traction to both wheels at all times
* Not recommended for street driven vehicles
Item #: D60-SPOOL-3-35
Condition:
New
Price: $165.00
locker,spool,traction,DANA 60,FULL SPOOL 30 SPLINE,d60-spool-4-30,d60-spool,d60-spool,4,yp,fsd60-4-30
Description: If you need complete traction and the lowest price with out sacrificing strength.
Item #: D60-SPOOL-4-30
Condition:
New
Price: $220.00
locker,spool,traction,DANA 60,FULL SPOOL 35 SPLINE,d60-spool-4-35,d60-spool,d60-spool,4,yp,fs-d60-4-35
Description: If you need complete traction and the lowest price with out sacrificing strength.
Item #: D60-SPOOL-4-35
Condition:
New
Price: $145.00
locker,spool,traction,DANA 60,FULL SPOOL 35 SPLINE,d60-spool-4-40,d60-spool,d60-spool,4,yp,fs-d60-4-40
Description: * Fits Dana Spicer 60 with 40 spline axles
* 4.56 and up ratio only
* Provides 100% traction to both wheels at all times
* Not recommended for street driven vehicles
Item #: D60-SPOOL-4-40
Condition:
New
Price: $275.00
asi-d60, dana 60 axle seal, inner axle seal, d60, DS 52148 / YMSS1018 / 2C3Z-3254-AA, super duty, ford
Description: Dana 50 and Dana 60 Super Duty inner axle seal - Straight Axle - Super Duty Only - Ref DS 52148 / YMSS1018 / 2C3Z-3254-AA
Item #: ASI-D60-SD
Condition:
New
Price: $18.00
Dana 60 rear drive flanges, double splined shafts, 4340 chromoly,dfr,
Description: These are rear bolt on flanges that allow you to run double spline shafts in your Dana 60, Dana 70, or Dana 80. We have american made 4340 and 300m shafts available, to give you the ultimate...More Details »
Item #: DFR-
Condition:
New
Price: $325.00
axle protection armor rearend diff guards blue torch fab,d60-bsfw,d60
Description: The Differential cover is a 1 piece Plate steel cap 3/8" (.375") bent 8 ways then welded to a 3/8" ring! The fill plug is a generous 1" ID for easy fill and oil level check. The D60 is our best...More Details »
Item #: DCD60-DS-FAB
Condition:
New
Price: $175.00
Description: * Designed and engineered for performance applications
* Manufactured from high-strength, nodular iron
* Built with ribbing to protect differential components from off-road hazards
* Ensures...More Details »
Item #: DCD60-DS-N-DS
Condition:
New
Price: $170.00
ubolt pinion yoke ford chevy cucv dodge,d60-yoke,d60-yoke-1310-29u,yoke,1310,
Description: This is a forged pinion yoke stronger than billet, the u bolt style also gives you the extra strength over straps.
1.062" cap diameter
3.219" snap ring span
Fits Dana Spicer 60, 70, 70U and...More Details »
Item #: YOKE-D60-1310-29U
Condition:
New
Price: $100.00
ubolt pinion yoke ford chevy cucv dodge,d60-yoke,d60-yoke-1330-29s,yoke,1310, 2-4-8051-1X, 2-4-4291-1X
Description: OE Dana Spicer Pinion Yoke
1.062" cap diameter
1330 u-joint size
29 spline
3.625" snap ring span
Fits Dana Spicer 60, 70, 70U and 70HD
Outside snap ring design
Strap style
Item #: YOKE-D60-1330-29S
Condition:
New
Price: $45.00
Sale: $40.00
Save: 11%
Save: $5.00
ubolt pinion yoke ford chevy cucv dodge,d60-yoke,d60-yoke-1350-29u,yoke,1350,
Description: This is a forged pinion yoke stronger than billet, the u bolt style also gives you the extra strength over straps.
1.188? cap diameter
3.625? snap ring span
Fits Dana Spicer 60, 70, 70U and...More Details »
Item #: YOKE-D60-1350-29U
Condition:
New
Price: $100.00
ubolt pinion yoke ford chevy cucv dodge,d60-yoke,d60-yoke-1410-29u,yoke,1410,
Description: This is a factory replacement yoke, the u-bolt style also gives you the extra strength over straps.
1.188? cap diameter
4.188? snap ring span
Fits Dana Spicer 60, 70, 70U and 70HD
1410...More Details »
Item #: YOKE-D60-1410-29U
Condition:
New
Price: $105.00
Description: D60, D70 - Dana 60 & Dana 70 Side Carrier Bearing Spacer .120" - For use with Narrow Cases - Ref DS 47560-292. This is for ONE spacer!!
Item #: SKC-D60-CB-SPACER
Condition:
New
Price: $9.00
Description: Dana 60, Dana 61, Dana 70, Dana 70U & Dana 80 Carrier Shim Kit
Item #: SKC-D60/70/80
Condition:
New
Price: $8.00
axstud-d60ff,axstud,dana,dana 60/70/80,flange bolt
Description: These bolts make a great upgrade with chromoly shafts or factory shafts. Grade 12 for maximum strength! These are for full float rear axles. 16 are required for both sides. Classified as ASTM A574...More Details »
Item #: BOLT:7/16-14-1.5-12P
Condition:
New
Price: $3.00
dana 60 spindle nut kit,d60-spindle-nut,ak d50f-nuts-a,d60-spindle,d60,spindle,nutd
Description: Dana 60 Spindle Nut Kit:
1 Nut with retainer pin
1 Keyed washer
1 Locking Nut
Item #: D60-SPINDLE-NUT
Condition:
New
Price: $40.00
AK CD60,ABKR-CD60/70,ABKR,DODGE,BEARING,D70,D60,D70U,DANA,SPICER,DANA SPICER,abkr-,abkr,cd60
Description:
Fits 1994-2002 Dodge Dana Spicer 60 and 70U
Includes inner and outer bearings and races and axle seal
Services one side
Item #: ABKR-CD60/70
Condition:
New
Price: $90.00
excalibur 300m u-joint, 300m u-joint, excalibur, dana 60, d60, ford super duty, ford, u-joint, 300m, u-joints, np 806x-300m-kit, np806x-300m-kit, nitro gear & axle, nitro, front axle, axle,, made in usa, lifetime, warranty, rale
Description: The ECGS U-joint cross is made from 4340 and the caps are 4340. The entire u-joint unit is heat treated and cryo'd for ultimate strength and wear resistance. The u-joint comes with full circle...More Details »
Item #: D60-U-JOINT-4340
Condition:
New
Price: $275.00
AK CD60,ABKR-FD60/70,ABKR,FORD,BEARING,D70,D60,D70U,DANA,SPICER,DANA SPICER,abkr-,abkr,abkr-fd60/70,cd60,fd60/70
Description:
Fits 1967-1997 Ford F350 and E350 rear with Dana Spicer 60 or 70
Includes inner and outer bearings and races and axle seal
Services one side
Item #: ABKR-D60/70
Condition:
New
Price: $75.00