- Home »
- Catalog »
- GEARS, INSTALL KITS, CARRIERS, SPIDER GEARS »
- DANA SPICER GEARS
East Coast Gear Supply » ECGS
Browse DANA SPICER GEARS Products
dana,60,spider,gears,spider,gear,kit,30,spline, d60-, d60, d60-ipk, d60-ipk-s, d60-ipk-s-30, dana, spicer, dana spicer
Description: This kit includes spider gears, side gears,thrust washers, cross pin, and cross pin retainer. Spider gear kit fits Dana 60 one piece open carrier only! Does not fit 2 piece case or limited slip...More Details »
Item #: D60-IPK-S-30
Condition:
New
Price: $105.00
dana,60,spider,gears,spider,gear,kit,32,spline, d60-, d60, d60-ipk, d60-ipk-s, d60-ipk-s-32, dana, spicer, dana spicer
Description: This kit includes spider gears, side gears,thrust washers, cross pin, and cross pin retainer. Spider gear kit fits Dana 60 one piece open carrier only! Does not fit 2 piece case or limited slip...More Details »
Item #: D60-IPK-32
Condition:
New
Price: $105.00
dana,60,spider,gears,spider,gear,kit,35,spline, d60-, d60, d60-ipk, d60-ipk-s, d60-ipk-s-35, dana, spicer, dana spicer
Description: This kit includes spider gears, 35 spline side gears,thrust washers, cross pin, and cross pin retainer. Spider gear kit fits Dana 60 one piece open carrier only! Does not fit 2 piece case or...More Details »
Item #: D60-IPK-35
Condition:
New
Price: $105.00
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-gm/d,d60-spindle,d60,spindle,gm reid solid crane spindle,700013
Description: DANA SPICER REFERENCE PART # 700013
Manufactured by ECGS
Fits Chevy, Dodge, and GM Dana 60 Spindle:
* 7.5" Long
* 7" Flange
* 6 HOLES
* Bearing Journals 2.020" X 2.255"
* Spindle...More Details »
Item #: D60-SPINDLE-GM/D
Condition:
New
Price: $120.00
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-f-l,d60-spindle,d60,spindle,gm reid solid crane spindle,708085
Description: DANA SPICER REFERENCE PART # 708085
Manufactured by ECGS
Fits Ford 1993 -1998 Dana 60 Spindle, check flange width Pre 92 spindle has 6.5" flange and was used in later applications also:
* 7"...More Details »
Item #: D60-SPINDLE-FORD-L
Condition:
New
Price: $140.00
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-f-e,d60-spindle,d60,spindle,gm reid solid crane spindle,700022
Description: DANA SPICER REFERENCE PART # 700022
Manufactured by ECGS
Fits all Ford 92 and Earlier Dana 60 Spindle and some later check flange width late spindle has 7" Flange:
* 7" Long
* 6.5" Flange...More Details »
Item #: D60-SPINDLE-FORD-E
Condition:
New
Price: $140.00
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-brg,d60-spindle,d60,spindE, SBK-5, YSPSP-024-V2
Description: DANA SPICER PART # 700014 Dana 60 Spindle Bearing and Seal Kit
Includes: Bearing, two Seals and Thrust Washer.
Three Seal: Factory Style Kit. Includes: Bearing, Two Seals and Thrust...More Details »
Item #: D60-SPINDLE-BRG-2
Condition:
New
Price: $30.50
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-brg,d60-spindle,d60,spindle,700014
Description: DANA SPICER PART # 700014 Dana 60 Spindle Bearing and Seal Kit
Includes: Bearing, two Seals and Thrust Washer.
Three Seal: Factory Style Kit. Includes: Bearing, Two Seals and Thrust...More Details »
Item #: D60-SPINDLE-BRG
Condition:
New
Price: $28.50
dana 60,spindle bearing,spindle seal,spindle thrust washer,kit,axle shaft bearing,d60-spindle-bush,d60-spindle,d60,spindle,bushing
Description: Tired of your needle bearings failing and damaging your spindle or stub shaft? These bushings the bearing, comes with a new thrust washer and spindle seal. Works with 30 spline and 35 spline stubs....More Details »
Item #: D60-SPINDLE-BUSH-EC
Condition:
New
Price: $26.00
locker,spool,traction,DANA 60,FULL SPOOL 30 SPLINE,d60-spool-3-30,d60-spool,d60-spool,3,yp,fsd60-3-30
Description: * Fits Dana Spicer 60 with 30 spline axles
* 4.10 and down ratio only
* Provides 100% traction to both wheels at all times
* Not recommended for street driven vehicles
Item #: D60-SPOOL-3-30
Condition:
New
Price: $318.60
Sale: $275.00
Save: 14%
Save: $43.60
locker,spool,traction,DANA 60,FULL SPOOL 35 SPLINE,d60-spool-3-35,d60-spool,d60-spool,3,yp,fsd60-3-35
Description: * Fits Dana Spicer 60 with 35 spline axles
* 4.10 and down ratio only
* Provides 100% traction to both wheels at all times
* Not recommended for street driven vehicles
Item #: D60-SPOOL-3-35
Condition:
New
Price: $165.00
locker,spool,traction,DANA 60,FULL SPOOL 30 SPLINE,d60-spool-4-30,d60-spool,d60-spool,4,yp,fsd60-4-30
Description: If you need complete traction and the lowest price with out sacrificing strength.
Item #: D60-SPOOL-4-30
Condition:
New
Price: $220.00
locker,spool,traction,DANA 60,FULL SPOOL 35 SPLINE,d60-spool-4-35,d60-spool,d60-spool,4,yp,fs-d60-4-35
Description: If you need complete traction and the lowest price with out sacrificing strength.
Item #: D60-SPOOL-4-35
Condition:
New
Price: $145.00
locker,spool,traction,DANA 60,FULL SPOOL 35 SPLINE,d60-spool-4-40,d60-spool,d60-spool,4,yp,fs-d60-4-40
Description: * Fits Dana Spicer 60 with 40 spline axles
* 4.56 and up ratio only
* Provides 100% traction to both wheels at all times
* Not recommended for street driven vehicles
Item #: D60-SPOOL-4-40
Condition:
New
Price: $275.00
asi-d60, dana 60 axle seal, inner axle seal, d60, DS 52148 / YMSS1018 / 2C3Z-3254-AA, super duty, ford
Description: Dana 50 and Dana 60 Super Duty inner axle seal - Straight Axle - Super Duty Only - Ref DS 52148 / YMSS1018 / 2C3Z-3254-AA
Item #: ASI-D60-SD
Condition:
New
Price: $18.00
Dana 60 rear drive flanges, double splined shafts, 4340 chromoly,dfr,
Description: These are rear bolt on flanges that allow you to run double spline shafts in your Dana 60, Dana 70, or Dana 80. We have american made 4340 and 300m shafts available, to give you the ultimate...More Details »
Item #: DFR-
Condition:
New
Price: $325.00
axle protection armor rearend diff guards blue torch fab,d60-bsfw,d60
Description: The Differential cover is a 1 piece Plate steel cap 3/8" (.375") bent 8 ways then welded to a 3/8" ring! The fill plug is a generous 1" ID for easy fill and oil level check. The D60 is our best...More Details »
Item #: DCD60-DS-FAB
Condition:
New
Price: $175.00
Description: * Designed and engineered for performance applications
* Manufactured from high-strength, nodular iron
* Built with ribbing to protect differential components from off-road hazards
* Ensures...More Details »
Item #: DCD60-DS-N-DS
Condition:
New
Price: $170.00
ubolt pinion yoke ford chevy cucv dodge,d60-yoke,d60-yoke-1310-29u,yoke,1310,
Description: This is a forged pinion yoke stronger than billet, the u bolt style also gives you the extra strength over straps.
1.062" cap diameter
3.219" snap ring span
Fits Dana Spicer 60, 70, 70U and...More Details »
Item #: YOKE-D60-1310-29U
Condition:
New
Price: $100.00
ubolt pinion yoke ford chevy cucv dodge,d60-yoke,d60-yoke-1330-29s,yoke,1310, 2-4-8051-1X, 2-4-4291-1X
Description: OE Dana Spicer Pinion Yoke
1.062" cap diameter
1330 u-joint size
29 spline
3.625" snap ring span
Fits Dana Spicer 60, 70, 70U and 70HD
Outside snap ring design
Strap style
Item #: YOKE-D60-1330-29S
Condition:
New
Price: $45.00
Sale: $40.00
Save: 11%
Save: $5.00
ubolt pinion yoke ford chevy cucv dodge,d60-yoke,d60-yoke-1350-29u,yoke,1350,
Description: This is a forged pinion yoke stronger than billet, the u bolt style also gives you the extra strength over straps.
1.188? cap diameter
3.625? snap ring span
Fits Dana Spicer 60, 70, 70U and...More Details »
Item #: YOKE-D60-1350-29U
Condition:
New
Price: $100.00
ubolt pinion yoke ford chevy cucv dodge,d60-yoke,d60-yoke-1410-29u,yoke,1410,
Description: This is a factory replacement yoke, the u-bolt style also gives you the extra strength over straps.
1.188? cap diameter
4.188? snap ring span
Fits Dana Spicer 60, 70, 70U and 70HD
1410...More Details »
Item #: YOKE-D60-1410-29U
Condition:
New
Price: $105.00
Description: D60, D70 - Dana 60 & Dana 70 Side Carrier Bearing Spacer .120" - For use with Narrow Cases - Ref DS 47560-292. This is for ONE spacer!!
Item #: SKC-D60-CB-SPACER
Condition:
New
Price: $9.00
Description: Dana 60, Dana 61, Dana 70, Dana 70U & Dana 80 Carrier Shim Kit
Item #: SKC-D60/70/80
Condition:
New
Price: $8.00
dana,70,chromoly,shafts,d70-chromo,chromo,d70,double spine
Description: Dana 60/70/80 GM 14 BOLT Double splined USA 4340 chromoly or 300M shafts. These shafts are designed for our Dana 60,70,80 drive flanges. The drive flanges bolt to your current hub and allow you to...More Details »
Item #: AX: CUSTOM-DS
Condition:
New
FOUR TO SIX WEEK LEAD TIME!!
Price: $500.00
axstud-d60ff,axstud,dana,dana 60/70/80,flange bolt
Description: These bolts make a great upgrade with chromoly shafts or factory shafts. Grade 12 for maximum strength! These are for full float rear axles. 16 are required for both sides. Classified as ASTM A574...More Details »
Item #: BOLT:7/16-14-1.5-12P
Condition:
New
Price: $3.00
Dana,60,70,80,4340,alloy,full,float,30,35,spline,d60-r-ff30-33-c,ya wff30-33.5,d60-r-ff30-33,d60-r-ff30,d60-r-ff,d60,ff30-33.5,wff30-33
Description: Yukon Dana 60/70/80 Full Float Rear 4340 Chromoly Cut-to-Length Shafts. Shafts come with 6 inches of spline to allow you to cut them down to fit your specific axle. They fit Dana 60, Dana 70, and...More Details »
Item #: AX:D60-R-FF30-33-C
Condition:
New
Price: $285.00
Dana,60,70,80,4340,alloy,full,float,30,35,spline,d60-r-ff30-36-c,ya wff30-36.5,d60-r-ff30-36,d60-r-ff30,d60-r-ff,d60,ff30-36.5,wff30-36
Description: Yukon Dana 60/70/80 Full Float Rear 4340 Chromoly Cut-to-Length Shafts. Shafts come with 6 inches of spline to allow you to cut them down to fit your specific axle. They fit Dana 60, Dana 70, and...More Details »
Item #: D60-R-FF30-36-C
Condition:
New
Price: $230.00
Dana,60,70,80,4340,alloy,full,float,30,35,spline,d60-r-ff35-33-c,ya wff35-33.5,d60-r-ff35-33,d60-r-ff30,d60-r-ff,d60,ff35-33.5,wff35-33
Description: Yukon Dana 60/70/80 Full Float Rear 4340 Chromoly Cut-to-Length Shafts. Shafts come with 6 inches of spline to allow you to cut them down to fit your specific axle. They fit Dana 60, Dana 70, and...More Details »
Item #: D60-R-FF35-33-C
Condition:
New
Price: $280.00
Dana,60,70,80,4340,alloy,full,float,30,35,spline,d60-r-ff35-36-c,ya wff35-36.5,d60-r-ff35-36,d60-r-ff35,d60-r-ff,d60,ff35-36.5,wff35-36
Description: Yukon Dana 60/70/80 Full Float Rear 4340 Chromoly Cut-to-Length Shafts. Shafts come with 6 inches of spline to allow you to cut them down to fit your specific axle. They fit Dana 60, Dana 70, and...More Details »
Item #: D60-R-FF35-36-C
Condition:
New
Price: $230.00
Dana,60,70,80,4340,alloy,full,float,30,35,spline,d60-r-ff35-39-c,ya wff35-39.5,d60-r-ff35-39,d60-r-ff35,d60-r-ff,d60,ff35-39.5,wff35-39
Description: Yukon Dana 60/70/80 Full Float Rear 4340 Chromoly Cut-to-Length Shafts. Shafts come with 6 inches of spline to allow you to cut them down to fit your specific axle. They fit Dana 60, Dana 70, and...More Details »
Item #: D60-R-FF35-39-C
Condition:
New
Price: $320.00
dana 60 spindle nut kit,d60-spindle-nut,ak d50f-nuts-a,d60-spindle,d60,spindle,nutd
Description: Dana 60 Spindle Nut Kit:
1 Nut with retainer pin
1 Keyed washer
1 Locking Nut
Item #: D60-SPINDLE-NUT
Condition:
New
Price: $40.00
d70-mik,d70,mik,master install kit,dana 70
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: D70-MIK
Condition:
New
Price: $220.00
dana,70,spool,35,spline,4340,chromoly,d70-spool-35
Description: This kit uses a Dana 80 spool with conversion parts to make it work in the Dana 70. It uses your stock 70 ring gear, and ring gear bolts. In the kit there are 12 ring gear bolt spacers, 35 spline...More Details »
Item #: D70-SPOOL-35
Condition:
New
Price: $500.00
d70-pik,d70,pinion install kit,dana 70,pik
Description: This kit is perfect for fixing a bad pinion bearing, but for new gear set-ups we recommend the Master Install kit.
-Pinion Bearings
-Pinion Nut
-Pinion Seal
-Preload shims
-Pinion Shims
-Loctite
-Marking Compound
Item #: D70-PIK
Condition:
New
Price: $130.00
d70-mini-######,d70-mini,d70,mini install kit,yukon,dana 70
Description: Kit includes:
-Pinion Nut
-Pinion Seal
-Preload shims
-Pinion Shims
-Adjustable Differential Shims
Item #: D70-MINI-######
Condition:
New
Price: $65.00
d70-mik-hd,zk d70-hd,d70,mik,mik-hd,heavy duty,master install kit
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: D70-MIK-HD
Condition:
New
Price: $215.00
Description: Dana 70HD & Dana 80 Side Carrier Bearing Spacer .196" - For use with Narrow Cases - Ref DS 707069X. This is for ONE spacer!!
Item #: SKC-D80-CB-SPACER
Condition:
New
Price: $15.00
d70-mik-u,d70-mik,d70,mik,d70-u,master install kit
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Crush Sleeve or Preload Shims
Pinion Shims
Loctite...More Details »
Item #: D70-MIK-U
Condition:
New
Price: $185.00
dana 70,power-lok,dodge,posi,cummins,traction,limited slip,2005750,power,power lok,lok,posi,limited,limited slip,positraction,70u,dana 70,d70-pl-3-32
Description: This is a complete positraction unit, 32 spline 4.10 and down carrier. One of the few positraction units available for dana 70. It will provide you with the traction you're looking for with good...More Details »
Item #: D70-P/L-3-32-AN
Condition:
New
Price: $1,000.00
DANA,80,BEARING,KIT,DIFFERENTIAL,KIT,INSTALL,KIT,BEARINGS,PINION,SET-UP,KIT, master, ford, dually,d80-mik-a,mik,d80,
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Preload Shims
Pinion Shims
Loctite
Marking Compound...More Details »
Item #: D80-MIK-A
Condition:
New
Price: $265.00
DANA,80,BEARING,KIT,DIFFERENTIAL,KIT,INSTALL,KIT,BEARINGS,PINION,SET-UP,KIT, master, ford, dually,d80-mik-b,d80-mik,mik,d80
Description: This is a full set up kit to do the job right. It includes:
Carrier bearings
Pinion Bearings
Pinion Nut
Pinion Seal
Preload Shims
Pinion Shims
Loctite
Marking Compound...More Details »
Item #: D80-MIK-B
Condition:
New
Price: $385.00
DANA,80,MINI,INSTALL,KIT,PINION,SEAL,SHIMS,d80-mini,d80,mini,mini install kit
Description: Kit includes:
-Pinion Nut
-Pinion Seal
-Crush Sleeve or preload shims
-Pinion Shims
-Adjustable Differential Shims
Item #: D80-MINI
Condition:
New
Price: $100.00
DANA,80,PINION,INSTALL,KIT,F350,DODGE,DANA,80,DUALLY,AXLE,REBUILD,d80-pik,d80,pik, pinion install kit
Description: This kit is perfect for fixing a bad pinion bearing, but for new gear set-ups we recommend the Master Install kit.
-Pinion Bearings
-Pinion Nut
-Pinion Seal
-Preload shims
-Pinion Shims
-Loctite
-Marking Compound
Item #: D80-PIK
Condition:
New
Price: $185.00
Description: * Designed and engineered for performance applications
* Manufactured from high-strength, nodular iron
* Built with ribbing to protect differential components from off-road hazards
* Ensures...More Details »
Item #: DCD80-DS-N-DS
Condition:
New
Price: $145.00
PN-011, PN, PINION NUT, YSPPN-011
Description:
Pinion nut for Dana Spicer 80
1 7/8" socket
Item #: PN-011
Condition:
New
Price: $12.00
Dana,60,70,80,4340,chromoly,full,float,35,spline,d80-r-ff37-36-c,ya wff37-36.5,d80-r-ff37,d80
Description: Yukon Dana 60/70/80 Full Float Rear 4340 Chromoly Cut-to-Length Shafts. Shafts come with 6 inches of spline to allow you to cut them down to fit your specific axle. They fit 80 and come with a...More Details »
Item #: D80-R-FF37-36-C
Condition:
New
Price: $305.00
Dana,60,70,80,4340,chromoly,full,float,35,spline,d80-r-ff37-39-c,ya wff37-39.5,d80-r-ff37,d80
Description: Yukon Dana 60/70/80 Full Float Rear 4340 Chromoly Cut-to-Length Shafts. Shafts come with 6 inches of spline to allow you to cut them down to fit your specific axle. They fit 80 and come with a...More Details »
Item #: D80-R-FF37-39-C
Condition:
New
Price: $275.00
Dana,60,70,80,4340,chromoly,full,float,35,spline,d80-r-ff37-43-c,ya wff37-43.5,d80-r-ff37,d80
Description: Yukon Dana 60/70/80 Full Float Rear 4340 Chromoly Cut-to-Length Shafts. Shafts come with 6 inches of spline to allow you to cut them down to fit your specific axle. They fit 80 and come with a...More Details »
Item #: D80-R-FF37-43-C
Condition:
New
Price: $275.00
DANA 80, D80, DANA, 80, 40 SPLINE, 40, D80-SPOOL-, SPOOL, D80-SPOOL, D80-SPOOL-40
Description: Dana 80 Full Spool 40 Spline. Requires aftermarket 40 spline shafts.
Item #: D80-SPOOL-40
Condition:
New
Price: $625.00
YOKE-D80-1350, yoke-, yoke, d80, dana 80, YOKE-D80, YOKE-D80-, YOKE-D80-1350-37U, YY D80-1350-37U
Description: 3.622' snap ring span
1.188' cap diameter
37 Spline
Outside snap ring
U-BOLT STYLE
Item #: YOKE-D80-1350-37U
Condition:
New
Price: $125.00
Description: 4.188' snap ring span
1.188' cap diameter
37 Spline
Outside snap ring
STRAP STYLE
Item #: YOKE-D80-1410S
Condition:
New
Price: $140.00
3-4-11281-1X, YOKE-D80-1480S, yoke-, yoke, d80, dana 80, YOKE-D80, YOKE-D80-, 3-4-11171
Description: 4.188' snap ring span
1.375' cap diameter
37 Spline
Outside snap ring
U-BOLT STYLE
Item #: YOKE-D80-1480-37U
Condition:
New
Price: $150.00
Description: 37 spline
Fits Dana Spicer 80
Round companion flange
Item #: YOKE-D80-RF-37
Condition:
New
Price: $220.00
AK CD60,ABKR-CD60/70,ABKR,DODGE,BEARING,D70,D60,D70U,DANA,SPICER,DANA SPICER,abkr-,abkr,cd60
Description:
Fits 1994-2002 Dodge Dana Spicer 60 and 70U
Includes inner and outer bearings and races and axle seal
Services one side
Item #: ABKR-CD60/70
Condition:
New
Price: $90.00
excalibur 300m u-joint, 300m u-joint, excalibur, dana 30, dana 44, d30, d44, gm 10 bolt, u-joint, 300m, u-joints, np 760x-300m-kit, np760x-300m-kit, nitro, nitro gear & axle, front axle, axle, dana 60, made in usa, lifetime, warranty, raleigh, durham, nor
Description: The ECGS U-joint cross is made from 4340 and the caps are 4340. The entire u-joint unit is heat treated and cryo'd for ultimate strength and wear resistance. The u-joint comes with full circle...More Details »
Item #: D44-U-JOINT-4340
Condition:
New
Price: $200.00
excalibur 300m u-joint, 300m u-joint, excalibur, dana 60, d60, ford super duty, ford, u-joint, 300m, u-joints, np 806x-300m-kit, np806x-300m-kit, nitro gear & axle, nitro, front axle, axle,, made in usa, lifetime, warranty, rale
Description: The ECGS U-joint cross is made from 4340 and the caps are 4340. The entire u-joint unit is heat treated and cryo'd for ultimate strength and wear resistance. The u-joint comes with full circle...More Details »
Item #: D60-U-JOINT-4340
Condition:
New
Price: $275.00
AX:D44-9.72-19-AP, USA,GM,ford,jeep, waggoneer, wagoneer,Dana,44,shafts,chromoly,44,axle,shafts,chromoly,dana,44,stub,shafts, american made, USA Made, Made In America, Made In USA,
Description: Upgrade your DANA 44 to these USA Made Chromoly Outer stub shafts. They are made out of high tensile strength 4340 Chromoly and then heat-treated twice to produce these heavy-duty axles that are...More Details »
Item #: AX:D44-9.72-19-AP
Condition:
New
Price: $175.00
Description: Includes inner and outer bearings and races and wheel seal
Services one side
Item #: ABKF-D44-F-1/2
Condition:
New
Price: $45.00
AK CD60,ABKR-FD60/70,ABKR,FORD,BEARING,D70,D60,D70U,DANA,SPICER,DANA SPICER,abkr-,abkr,abkr-fd60/70,cd60,fd60/70
Description:
Fits 1967-1997 Ford F350 and E350 rear with Dana Spicer 60 or 70
Includes inner and outer bearings and races and axle seal
Services one side
Item #: ABKR-D60/70
Condition:
New
Price: $75.00